Technical article 110514

Installing OpenServer 5.0.4 using the SLS OSS463B boot floppy causes a kernel panic on Compaq systems with Compaq 64-bit Dual Channel Wide Ultra SCSI controller.

OpenServer 5.0.4

Written · Last revised

Problem

During the installation of SCO OpenServer Release 5.0.4, using the replacement boot floppy from Support Level Supplement (SLS) OSS463B on systems equipped with a Compaq 64-bit Dual Channel Wide Ultra-2 SCSI controller, the UNIX kernel panics with a "trap type E" during initialization of the slha driver.

Solution

Disable the slha driver at the initial Boot: prompt by typing the following:

defbootstr disable=slha

See also

ta105925, "What is SLS OSS463B, the Multiple SCSI Install N0 and BTLD Supplement?"

From the Xinuos technical article database, record 110514. Reproduced with permission. The original is at www.sco.com/ta/110514, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.