Technical article 127583

Is there a way to workaround IRQ conflicts I am experiencing trying to configure additional hardware on my SCO OpenServer 5.0.7 system?

OpenServer 5.0.7

Written · Last revised

Problem

I am trying to add an additional piece of hardware to my SCO OpenServer 5.0.7 server but when I reboot I see IRQ conflict messages and either:

1) The Server hangs, 2) The card I have added does not work, or 3) Other cards on the server no longer work.

Solution

This problem can occur on systems where there is a lack of free IRQs.

There are a number of possible ways to workaround this issue:

1) Boot the server and enter the BIOS setup and see if you can resolve the IRQ conflict.

2) Boot the server and enter the BIOS and disable any devices that are surplus to requirements.

3) In some cases the installation of SCO SMP has been seen to resolve IRQ conflict issues. SCO SMP can be installed without a license.

For details on how to install SCO SMP please see:

TA127578 "How can I install SCO Symmetrical Multiprocessing (SMP) on my SCO OpenServer 5.0.7 MP5 system?"

From the Xinuos technical article database, record 127583. Reproduced with permission. The original is at www.sco.com/ta/127583, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.