Problem
I relicensed my system and the uname command does not reflect the new license.
OR:I relicensed my system with a license for more users, but the system still limits users according to the old license.
Cause
Normally, increasing a system's user licenses is done by adding a
user-bump license. It is not recommended that the operating system
be completely relicensed. Licensing the operating system through the
license manager will only update the nodelock file; it will not
update the kernel archive. The uname command (and other system
utilities) use the license information in the kernel archive.To update the kernel archive licensing data, follow the instructions below.
Solution
Before starting, make sure you have all the license information for the license shown in the License Manager. You will need the serial number, license key, and license data (key extension). If you do not have this information, contact your SCO software supplier to obtain it. Once you have all the license information before you, do the following:
1. Boot in single-user mode:# init 12. Make a backup copy of the kernel called unix.good:
# btmnt -w
# cp /stand/unix /stand/unix.good
# btmnt -r3. Brand the kernel with the correct license information:
brand -a "license-data" SERIAL-NUMBER license-code \
/etc/conf/pack.d/kernel/os.a4. Relink the kernel:/etc/conf/cf.d/link_unix5. Reboot the system.NOTES: If the system will not boot after these changes, you can boot off
the previous kernel by typing "unix.good" (without the quotes) at
the Boot: prompt.If you have relicensed the system for more users, run 'tunek' to
adjust system resources for the new user limit. See ta104929,
"If I upgrade to SCO OpenServer Release 5.0.0, is my system tuned?"
for details on how to tune the kernel.