Technical article 125212

My application is failing to build on OpenServer 5.0.7 with undefined symbols _fini and _init

OpenServer 5.0.7

Written · Last revised

Problem

Attempting to build my third party application on OpenServer 5.0.7, with the development system is failing with undefined symbols _fini and _init as follows:

undefined                       first referenced
 symbol                             in file
_fini                               /my/build/dir/a.out
_init                               /my/build/dir/a.out
i386ld fatal: Symbol referencing errors. No output written
to your.application

Cause

There have been many core changes in OpenServer 5.0.7 and
these two symbols have been moved to other locations.
Normally this is from a third party makefile or script
referencing idld directly.  This is incorrect for cc
should be the program called.  Calling idld directly does
ensure cross-platform compatibility and even release
compatibility.

Solution

The best solution for this problem is to have your third
party application vendor rewrite their compilation/build
script to properly call cc when linking their object files
together.  This is standard practice as the cc for the
specific release will know about the core symbols that
must be present for the linking to perform properly.

If your third party application vendor is unwilling or unable to properly rewrite their build script, there is a workaround for this, as follows:

Move the /bin/idld binary out of the way, "mv /bin/idld /bin/idld.orig", and then create a script called /bin/idld, with the following contents:

=============================CUT HERE=============================
   #!/bin/sh
   #
   # Add crti.o to link lines which newly require it;
   # move crtn.o to end of link line where it belongs
   #
   had_crt1=0
   had_crti=0
   had_crtn=0
   for arg; do
     case `basename $arg` in
       crt1.o) had_crt1=1; crt_path=`dirname $arg`;;
       crti.o) had_crti=1;;
       crtn.o) had_crtn=1; crtn_path=$arg; continue;;
     esac
     args="$args $arg"
   done
   if [ $had_crt1$had_crti = 10 -a -f $crt_path/crti.o ];
 then
     args="$args $crt_path/crti.o"
   fi
   if [ $had_crt1$had_crtn = 11 -a -f $crt_path/crtn.o ];
 then
     args="$args $crt_path/crtn.o"
   elif [ $had_crtn = 1 ]; then
     args="$args $crtn_path"
   fi
   exec /bin/idld.orig $args
=============================END HERE=========================

Then make this script executable, "chmod +x /bin/idld".

Now attempt to rebuild your application and the unresolved symbols error should not be present.

See also

TA#111092 - "Trying to compile Oracle 7.3.4 on OpenServer 5.0.5 fails with "/usr/ccs/lib/crt1.o fatal: cannot open ELF for input". "

From the Xinuos technical article database, record 125212. Reproduced with permission. The original is at www.sco.com/ta/125212, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.