Problem
Some systems are known to panic with the panic message:
PANIC: k_trap kernel mode trap type 0x0000000FThis problem has only been experienced on Pentium Pro machines,
up to this point. It is most frequently associated with the SCO
parallel driver and printing to a parallel port. It has also been
associated with running the OS on a single CPU without SCO SMP on
a machine containing an APIC chipset and multiple cpus. Solution
For SCO OpenServer Release 5.0.0 and 5.0.2, install Support Level Supplement (SLS) OSS452A available from SCO's Online Services. This fixes the kernel's trap handler which upon detection of a trap F, either prints out a warning message or silently ignores the trap. The behavior is tunable and is described in the SLS OSS452A cover letter.
Possible workarounds are listed below. The problem is with
the BIOS, but SCO has attempted to provide alternative solutions
if the BIOS manufacturer has not yet fixed the problem.Here are four possible workarounds:1. Obtain a BIOS fix from the BIOS manufacturer. Note this
solution is the most recommended if available. Presently,
however, the availability of this kind of fix seems limited.2. On some EISA systems, there may be an option to configure
"virtual wire mode". In particular, it is known that on some
HP machines with ADIC chipsets, it is possible to choose
"virtual wire mode" from the set of Advanced Options and
change it from the default "local ADIC" to "I/O ADIC". This
change has been known to resolve the issue.3. Install and license SMP. This may create an environment where
the problem does not occur.4. For SCO OpenServer 5.0.0 and 5.0.2, install the SLS OSS452A
from SCO, which includes a replacement trap.o. The fix will
allow Trap Fs to occur without panic'ing the system. SLS
OSS452A is available for downloading from SCO's Online Services. See also
TA105500, "What is Support Level Supplement (SLS) OSS452A, the Trap F Supplement?"