Problem
My system hangs at the boot letter H after installing SMP on a Dell PowerEdge 2300.
Solution
This system requires a specific order of installation in order to support the multiprocessor environment.
The correct order of the installation is: - Install SCO OpenServer 5.0.4. - Install Symmetrical Multiprocessing (SMP); do not reboot. - Install Release Supplement 504C (rs504c); do not reboot. - Install SLS OSS469D; you can now reboot.
Before proceeding with this installation, you should make a copy of the current UNIX kernel in the following manner:
1. cd / 2. btmnt -w 3. cd /stand 4. cp unix unix.okay 5. chown bin:mem unix.okay 6. cd / 7. btmnt -r
If you have trouble booting the system after the installation, you can type unix.okay at the boot: prompt and enter System Maintenance mode to roll back the changes you made through the Software Manager (custom). Note that the correct order for rolling back installations is in reverse order from which you installed them (that is, OSS469D first, then rs504c, and finally SMP).
See also
ta109975, "What is SLS OSS469D, the Core OS and Networking Supplement for SCO OpenServer Release 5.0.4?"
ta105811, "What is the Release Supplement 504C for SCO OpenServer Release 5.0.4 (rs504c) and how can I obtain it?"