Problem
What is contained in Release Supplement 504C, the third Release Supplement for SCO OpenServer Release 5.0.4, and how can I obtain it?
Solution
The attached cover letter describes the enhancements and corrections to known problems for SCO OpenServer Release 5.0.4 found in, and the installation procedure for, Release Supplement 504C.
NOTES: The Release Supplement 504C for SCO OpenServer Release 5.0.4 is
available online from the SCO FTP site and on the SCO Support
Library (SSL) Release 1.1.6 or greater. For information on how to
download the online version, see ta107210 "How to use SCO's
online service information systems."If you are loading this release supplement from a CD-ROM, the RS504C supplement is located in this directory:
/supplements/Supplements/rs504c/The Release Supplement 504C for SCO OpenServer Release 5.0.4 corrects the following problems on an SCO OpenServer Release 5.0.4 system:
For a complete list of the changes that Release Supplement 504C for SCO OpenServer Release 5.0.4 (RS504C) makes to an SCO OpenServer Release 5.0.4 system, see this file:
http://www.sco.com/support/download.htmlThe following list highlights some of the more prominent changes. For
more details on any item, see the rs504c.fixlist file.+ Fixes to the components under /opt/K/SCO/nfs, /opt/K/SCO/tcp, and
/opt/K/SCO/Unix. See this cover letter's section entitled
``Networking Maintenance Supplement (OSS449F)''.+ Fixes to situations known to cause system panics, including the wd
driver, which no longer panics when mounting a second IDE hard disk.+ Fixes for memory leaks in ftp(TC), ftpd(ADMN), inetd(ADMN), the shared
object /lib/libprot.so.*, and the security database library
/lib/libprot.*.+ A fix to prevent the copy protection daemon (cpd) from using up
excessive cpu and STREAMS.+ Fixes to cron(C) to prevent it getting into a tight loop and using up
excessive cpu time.+ A fix for licensing checksum problem with SCO Merge.+ The ability to send kernel messages to a given multiscreen using a
bootstring. See this cover letter's section entitled ``Sending kernel
messages to a multiscreen''.+ Improved ppp(ADMN) and PPP Manager.+ Upgraded hardware support.+ Corrected permissions on several files.+ Eliminated conflicting mnemonics in the Print Job Manager.+ Support in idconfig(ADM) for the ``G'' characteristic in the mdevice
file.+ The ability in custom(ADM) to install VOL images in the tar archive
format.+ Ability to configure ATAPI recognition delay during boot. See this
cover letter's section entitled ``wd driver: delay searching for ATAPI
device''._________________________________________________________________________
NOTE RS504C supersedes Release Supplements 504A and 504B (RS504A
and RS504B).
_________________________________________________________________________If you have questions regarding this supplement, or the product on which it is installed, please contact your software supplier.
Who should install the supplement?Install this supplement on all SCO OpenServer 5.0.4 systems, including systems with RS504A or RS504B previously installed.
Installing the supplementThe supplement consists of four VOL files. If you download the
supplement as media images, make sure you have all four files.To install the supplement:1. Log in as root.2. Start the Software Manager by double-clicking its icon on the
desktop, or by entering the following at the command-line prompt:scoadmin software3. From the Software menu, select Install New._________________________________________________________________________
NOTE You no longer need to run Load and Apply for a supplement
(which is a software patch), as you did in SCO OpenServer
Releases 5.0.0 and 5.0.2. Now you install a supplement using
the same procedure you use to install any software product.
_________________________________________________________________________4. When prompted for the host (machine), select the current host and
then Continue.5. In the Select Media window:a. If you are loading this release supplement from a media image,
click on Media Device and select Media Images, then Continue.
(You may need to pull down the scroll bar before you see the
Media Images option.)In the Enter Image Directory window, enter the absolute pathname for the directory in which the media images reside; for example:
/tmpClick on OK.b. If you are loading this release supplement from a CD-ROM or
floppy disk, select the appropriate drive and then Continue.6. The Install Selection window lists the three supplements included in
RS504C.You must install the Software Manager Supplement first.
Select only the ``Software Manager Supplement'', then click on
Install.There is a short delay while the installation takes place, and a message instructs you to restart the Software Manager before installing the rest of RS504C.
7. In the Installation Complete window, click on OK. The Software
Manager should now list the Software Manager Supplement.8. Exit the Software Manager by selecting Host, then Exit. Then restart
the Software Manager, now patched by the supplement you just
installed.9. From the Software menu, select Install New.10. When prompted for the host (machine), select the current host and then Continue.
11. In the Select Media window:a. If you are loading this release supplement from a media image,
click on Media Device and select Media Images, then Continue.
(You may need to pull down the scroll bar before you see the
Media Images option.)In the Enter Image Directory window, enter the absolute pathname for the directory in which the media images reside; for example:
/tmpClick on OK.b. If you are loading this release supplement from a CD-ROM or
floppy disk, select the appropriate drive and then Continue.12. In the Install Selection window, select one or both of the remaining
supplements. (If you do not want any of the new drivers under
Supplemental Graphics Hardware Support, you do not need to install
them.) Click on Install.There is a short delay while the installation takes place.
13. In the Installation Complete window, click on OK. The Software
Manager should list the supplements you selected. The patched
software is now installed.14. Exit the Software Manager by selecting Host, then Exit.
15. Reboot the machine. The Software Manager automatically relinks the
kernel after each installation. You must reboot before the new
kernel takes effect.Installing the release supplement across the networkYou can install the supplement from one SCO OpenServer Release 5.0.4
machine onto another across a TCP/IP network. To do so, you need a
software server, which you can create as described in Chapter 19,
``Installing and managing software over the network'' in the Networking
Guide. This server has a user account called swadmin.Use the Software Manager to install or load RS504C on the software
server. (See this cover letter's section entitled ``Installing the
supplement''.)To install the supplement onto a local machine from the software server,
start the Software Manager and select Install New. In the Begin
Installation window, you are prompted for the source location of the
patch. Select From Another Host. You will need to provide the name of
the software server, as well as the password of the swadmin user on the
software server.Removing the supplement_________________________________________________________________________
NOTE You must remove software patches (such as release
supplements) in the reverse order of their installation. In other
words, if you installed ``Patch1'', then ``Patch2'', then
``Patch3'', you must remove ``Patch3'', then ``Patch2'', before you
can remove ``Patch1''.
_________________________________________________________________________To remove a supplement:1. Log in as root.2. Start the Software Manager by double-clicking its icon on the
desktop, or by entering the following at the command-line prompt:scoadmin software3. Select the title of the supplement you are removing.4. From the Software menu, select Remove Software. In the confirmation
window, verify that you selected the right supplement, then click on
Remove._________________________________________________________________________
CAUTION Removing a patch in SCO OpenServer Release 5.0.4
corresponds to rolling it back and unloading it in earlier SCO
OpenServer releases. If you need to keep a copy of a patch
loaded, see ``Removing software'' in the SCO OpenServer
Handbook.
_________________________________________________________________________There is a short delay, then the Removal complete window appears.
Click on OK. The Software Manager should no longer list the
supplement you removed._________________________________________________________________________
NOTE Some effects of certain supplements are irreversible
because of the nature of the correction (for example, restoring
correct permissions on system directories). However, removing
the supplement will remove the patch name from the system.
_________________________________________________________________________5. When you have finished removing and installing software, exit the
Software Manager by selecting Host, then Exit.SCO SMP and RS504CIf you are installing both RS504C and SCO SMP, install SCO SMP first. If you install SCO SMP at a later time, remove RS504C first, then reinstall RS504C after installing SCO SMP.
When you remove RS504C:In the Confirm Selected Software window, click on More options, then select Leave Loaded.
To reinstall RS504C:In the Select Media window, select Loaded Software as the media
device. Then select RS504C for installation.See this cover letter's sections entitled ``Removing the supplement'' and
``Installing the supplement''.After installing RS504C, install Support Level Supplement (SLS) OSS469D. See ta105888 for information on an MP-related issue with RS504C that may be avoided or corrected by application of OSS469D.
Preserving customized filesRS504C backs up the following user-configurable files, then modifies or replaces them:
/etc/conf/pack.d/ip/space.c /etc/conf/pack.d/arp/space.c /etc/conf/pack.d/eeE/space.c /etc/conf/pack.d/kernel/space.c /etc/default/inet /etc/gettydefs /etc/rc0 /etc/rc1 /etc/rc2 /etc/rc0.d/K25pm /etc/rc2.d/S25pm /etc/rc3 /usr/grafinfo/grafdev
If you have customized any of these files, you can restore your changes
from the backed-up copies after you install the supplement. The files
are backed up to:/usr/lib/custom/rs504c.sav/etc/conf/pack.d/ip/space.c /usr/lib/custom/rs504c.sav/etc/conf/pack.d/arp/space.c /usr/lib/custom/rs504c.sav/etc/conf/pack.d/eeE/space.c /usr/lib/custom/rs504c.sav/etc/conf/pack.d/kernel/space.c /usr/lib/custom/rs504c.sav/etc/default/inet /usr/lib/custom/rs504c.sav/etc/gettydefs /usr/lib/custom/rs504c.sav/etc/rc0 /usr/lib/custom/rs504c.sav/etc/rc1 /usr/lib/custom/rs504c.sav/etc/rc2 /usr/lib/custom/rs504c.sav/etc/rc0.d/K25pm /usr/lib/custom/rs504c.sav/etc/rc2.d/S25pm /usr/lib/custom/rs504c.sav/etc/rc3 /usr/lib/custom/rs504c.sav/usr/grafinfo/grafdev
Networking Maintenance Supplement (OSS449F)RS504C includes all the fixes from the Support Level Supplement OSS449F (the Networking Maintenance Supplement), and replaces OSS449F as well as supplements OSS449A through OSS449E (the Networking Performance SLS). These fixes address many known problems with the nfs, tcp, and Unix components of SCO OpenServer Release 5.0.4.
wd driver: delay searching for ATAPI deviceYou can now specify how long the wd driver searches for an ATAPI device
at boot time. Use the wd.delay bootstring as follows:wd.delay driver stops search after 4 secondswd.delay=N driver stops search after N secondsIf you do not specify the wd.delay bootstring, the driver searches for 31 seconds.
Sending kernel messages to a multiscreenYou can now send kernel messages to a given multiscreen, using a
bootstring. At the boot prompt, enter:unix cn.console=xwhere x is a multiscreen number from 1 to 12.
For example, to redirect console messages to screen 3, enter:
unix cn.console=3New graphics drivers in this supplementRS504C contains these new drivers:+ ATI Mach64 PCI (VT/GT)+ Cirrus Logic GD5465 PCI+ Cirrus Logic GD5480 PCI_________________________________________________________________________
NOTE In addition to these new drivers, some existing drivers are
modified by RS504C. See the rs504c.fixlist file for details:ftp://ftp.sco.com:/Supplements/rs504c/rs504c.fixlist_________________________________________________________________________To install and use these drivers:1. Install any or all of these drivers as described in this cover
letter's section ``Installing the supplement''.2. Start the Video Configuration Manager, and configure each driver you
selected as described in ``Configuring video adapters'' in the SCO
OpenServer Handbook.ATI Mach64 PCI (VT/GT)To complete configuration for this adapter, select one of these modes:
_____________________________
Mode Colors Hertz
_____________________________
1280x1024 64K 75 (4MB)
1280x1024 64K 70 (4MB)
1280x1024 64K 60 (4MB)
1280x1024 256 75 (2MB)
1280x1024 256 70 (2MB)
1280x1024 256 60 (2MB)
1024x768 16M 77 (4MB)
1024x768 16M 75 (4MB)
1024x768 16M 70 (4MB)
1024x768 16M 60 (4MB)
1024x768 64K 77 (2MB)
1024x768 64K 75 (2MB)
1024x768 64K 70 (2MB)
1024x768 64K 60 (2MB)
1024x768 256 77
1024x768 256 75
1024x768 256 70
1024x768 256 60
800x600 16M 77 (2MB)
800x600 16M 75 (2MB)
800x600 16M 72 (2MB)
800x600 16M 60
640x480 256 77
640x480 256 75
640x480 256 72
640x480 256 60_________________________________________________________________________
NOTE This driver does not support any 1600x1200 modes. Even with
the ATI3D XPRESSION+ card, this driver only supports modes up to
1280x1024.
__________________________________________________________________________________________________________________________________________________
NOTE Consider the capabilities of your monitor when determining
which resolution to configure. Do not select a resolution that is
higher than the maximum resolution supported by your monitor.
Also, if you select resolutions of 1024x768 or 1280x1024, you may
need to determine if your monitor works in interlaced or non-
interlaced mode at these resolutions. Consult your monitor's
documentation for information regarding supported resolutions.
_________________________________________________________________________Configuration notes+ The grafinfo file for this adapter is recreated when you select it
during graphics configuration.+ Information used by the X server to set graphics and text modes for
this graphics adapter or chip set is found in
/usr/lib/grafinfo/ati/m64pci.xgi. For more information about grafinfo
files, see ``Understanding video configuration'' in the SCO OpenServer
Handbook.Cirrus Logic GD5465 PCITo complete configuration for this adapter, select one of these modes:
___________________________
Mode Colors Hertz
___________________________
1600x1200 256 60
1280x1024 64K 75
1280x1024 64K 71.2
1280x1024 64K 60
1280x1024 32K 75
1280x1024 32K 71.2
1280x1024 32K 60
1280x1024 256 75
1280x1024 256 71.2
1280x1024 256 60
1024x768 16M 85
1024x768 16M 75
1024x768 16M 60
1024x768 64K 85
1024x768 64K 75
1024x768 64K 60
1024x768 32K 85
1024x768 32K 75
1024x768 32K 60
1024x768 256 85
1024x768 256 75
1024x768 256 60
800x600 16M 85
800x600 16M 75
800x600 16M 72
800x600 16M 60
800x600 16M 56
800x600 64K 85
800x600 64K 75
800x600 64K 72
800x600 64K 60
800x600 64K 56
800x600 32K 85
800x600 32K 75
800x600 32K 72
800x600 32K 60
800x600 32K 56
800x600 256 85
800x600 256 75
800x600 256 72
800x600 256 60
800x600 256 56
640x480 16M 85
640x480 16M 75
640x480 16M 72
640x480 16M 60
640x480 64K 85
640x480 64K 75
640x480 64K 72
640x480 64K 60
640x480 32K 85
640x480 32K 75
640x480 32K 72
640x480 32K 60
640x480 256 85
640x480 256 75
640x480 256 72
640x480 256 60_________________________________________________________________________
NOTE Consider the capabilities of your monitor when determining
which resolution to configure. Do not select a resolution that is
higher than the maximum resolution supported by your monitor.
Also, if you select resolutions of 1024x768 or 1280x1024, you may
need to determine if your monitor works in interlaced or non-
interlaced mode at these resolutions. Consult your monitor's
documentation for information regarding supported resolutions.
_________________________________________________________________________Configuration notes+ The grafinfo file for this adapter is recreated when you select it
during graphics configuration.+ Information used by the X server to set graphics and text modes for
this graphics adapter or chip set is found in
/usr/lib/grafinfo/cirrus/gd5465pci.xgi. For more information about
grafinfo files, see ``Understanding video configuration'' in the SCO
OpenServer Handbook.Cirrus Logic GD5480 PCITo complete configuration for this adapter, select one of these modes:
_______________________________________
Mode Colors Hertz
_______________________________________
1600x1200 64K 60
1600x1200 64K 48 (interlaced)
1600x1200 256 60
1600x1200 256 48 (interlaced)
1600x1200 32K 60
1600x1200 32K 48 (interlaced)
1280x1024 16M 75
1280x1024 16M 60
1280x1024 16M 43 (interlaced)
1280x1024 64K 85
1280x1024 64K 75
1280x1024 64K 60
1280x1024 64K 43 (interlaced)
1280x1024 256 85
1280x1024 256 75
1280x1024 256 60
1280x1024 256 43 (interlaced)
1280x1024 32K 85
1280x1024 32K 75
1280x1024 32K 60
1280x1024 32K 43 (interlaced)
1024x768 16M 85
1024x768 16M 75
1024x768 16M 70
1024x768 16M 60
1024x768 16M 43 (interlaced)
1024x768 16M 100
1024x768 64K 85
1024x768 64K 75
1024x768 64K 70
1024x768 64K 60
1024x768 64K 43 (interlaced)
1024x768 64K 100
1024x768 32K 85
1024x768 32K 75
1024x768 32K 70
1024x768 32K 60
1024x768 32K 43 (interlaced)
1024x768 32K 100
1024x768 256 85
1024x768 256 75
1024x768 256 70
1024x768 256 60
1024x768 256 43 (interlaced)
1024x768 256 100
800x600 16M 85
800x600 16M 75
800x600 16M 72
800x600 16M 60
800x600 16M 56
800x600 16M 100
800x600 32K 85
800x600 32K 75
800x600 32K 72
800x600 32K 60
800x600 32K 56
800x600 32K 100
800x600 64K 85
800x600 64K 75
800x600 64K 72
800x600 64K 60
800x600 64K 56
800x600 64K 100
800x600 256 85
800x600 256 75
800x600 256 72
800x600 256 60
800x600 256 56
800x600 256 100
640x480 16M 85
640x480 16M 75
640x480 16M 72
640x480 16M 60
640x480 16M 100
640x480 32K 85
640x480 32K 75
640x480 32K 72
640x480 32K 60
640x480 32K 100
640x480 64K 85
640x480 64K 75
640x480 64K 72
640x480 64K 60
640x480 64K 100
640x480 256 85
640x480 256 75
640x480 256 72
640x480 256 60
640x480 256 100_________________________________________________________________________
NOTE Consider the capabilities of your monitor when determining
which resolution to configure. Do not select a resolution that is
higher than the maximum resolution supported by your monitor.
Also, if you select resolutions of 1024x768 or 1280x1024, you may
need to determine if your monitor works in interlaced or non-
interlaced mode at these resolutions. Consult your monitor's
documentation for information regarding supported resolutions.
_________________________________________________________________________Configuration notes+ The grafinfo file for this adapter is recreated when you select it
during graphics configuration.+ Information used by the X server to set graphics and text modes for
this graphics adapter or chip set is found in
/usr/lib/grafinfo/cirrus/gd5480pci.xgi. For more information about
grafinfo files, see ``Understanding video configuration'' in the SCO
OpenServer Handbook.Memory requirements for SCO OpenServerThe SCO OpenServer Release Notes mention a Small Memory Supplement to be
made available for systems with less than 16MB RAM. That reference is
incorrect; there is no such supplement. SCO OpenServer requires at least
16MB RAM. We recommend at least 32MB RAM.Installing and configuring SCO VisionFS 1.2RS504C contains no changes to SCO VisionFS 1.2. The following
information is provided for those who might wish to install and configure
SCO VisionFS 1.2 at this time.An SCO VisionFS 1.2 license comes in the package with SCO OpenServer
Release 5.0.4. Use that license when you install SCO VisionFS from the
same CD-ROM from which you installed SCO OpenServer Release 5.0.4._________________________________________________________________________
NOTE An evaluation-only version of SCO VisionFS is contained on
the SCO Vision Family Evaluation CD, which also comes in the
package with SCO OpenServer Release 5.0.4. If you choose to
install this evaluation version of SCO VisionFS, do not use the SCO
VisionFS 1.2 license.
_________________________________________________________________________To access the instructions for SCO VisionFS 1.2 from the SCO OpenServer CD-ROM, mount the CD-ROM using the following command at the system prompt:
mount -r /dev/cd0 /mntYou can then read the text file /mnt/visionfs/readme.txt. Or you can
access the document in Netscape by entering:netscape /mnt/readme.htmFrom the Overview section, select the hot link ``SCO VisionFS 1.2+'',
which refers you to the SCO VisionFS installation instructions on the
CD-ROM.Read the installation information carefully before continuing with the installation.
To learn how to operate SCO VisionFS 1.2 after installation, read the
text file /mnt/visionfs/relnotes.txt. Or access the document in
Netscape:netscape /mnt/readme.htmand select the hot link ``SCO VisionFS Release Notes''. See also
ta109975, "What is SLS OSS469D, the Core OS Supplement for SCO OpenServer Release 5.0.4?"