Technical article 103264

My system panics with the message "panic PFNTOPFDAT:000000xx"

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

The system panics with the following error message:

panic PFNTOPFDAT:000000xx

Cause

This could be caused by memory recognition problems which occur on certain computers.

Solution

For SCO OpenServer5 Release:
---------------------------
This has been seen to have been caused by bad hardware memory inside
the server.
For Releases prior to SCO OpenServer5:
-------------------------------------
These problems are caused by the /boot program (boot(HW)) on the
486 platform.
Support Level Supplement (SLS) unx329 contains a new version of
boot(HW) which solves the memory recognition problem.  SLS unx329
is downloadable from the SCO Online Support System (sosco).

Another article in this database that further describes SLS unx329 and details the problems it addresses.

From the Xinuos technical article database, record 103264. Reproduced with permission. The original is at www.sco.com/ta/103264, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.