Technical article 114501

OpenServer 5.0.6 installation halts on a 32MB system.

OpenServer 5.0.6

Written · Last revised

Problem

After specifying a SCSI CD-ROM as the media device for installing OpenServer, the installation halts with the following messages:

Reading from install source: 10KB Warning

DTFS: dtnoderecd : inode 23 unknown type on dev ram (31/51)

System Error 5:
while exec'ing
/ramFS/instdir/igm/igm
/ramFS/instdir/igm/igm exited with status 2.
Or:
Reading from Install Source: 8KBWARNING:

HTFS: Invalid block 4115 on dev ram (31/49) WARNING: HTFS: error6: logging disabled

System Error 2:
while exec'ing
/fIFS/imqm/imqm
/fIFS/imqm/imqm exited with status 2
Press <Enter> to continue

Cause

The SCO OpenServer 5.0.6 installation routine requires more RAM than
in previous releases. Furthermore, the above symptoms are more likely
to occur when actually booting from the OpenServer CD-ROM.  In
addition, the installation may freeze when reading the initial floppy
image from a CD boot or may fail to recognize the root disk when
booting from the floppy.

Solution

Start the installation again from the beginning, using the OpenServer 5.0.6 Boot Floppy Disk and enter the following at the Boot: prompt:

defbootstr nbuf=100

This has the effect of temporarily reducing the size of the buffer cache resulting in more room for installation processes.

Alternatively, add more memory to the server.

See also

ta109640, "SCO OpenServer 5.0.5 installation halts on a 16MB system."

The OpenServer 5.0.6 Release Notes.

From the Xinuos technical article database, record 114501. Reproduced with permission. The original is at www.sco.com/ta/114501, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.