Technical article 125161

Openserver 5 installation fails on a Dell PowerEdge 1650 with a PERC3/DI controller with "no root disk controller found"

OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written

Problem

I am unable to install Openserver 5 on a Dell PowerEdge 1650. During the hardware initialization screen, it displays:

No root disk controller found

Solution

Download the latest driver from Dell's website which supports the PERC 3/DI controller. At the time of this writing, the driver is located at:

ftp://ftp.dell.com/scsi-raid/UxPer3di.exe

This is a self extracting dos executable that will need to be taken to a Windows system and executed to create the necessary HBA diskette.

Then, restart the installation and provide the following bootstring at the boot: prompt

defbootstr link=percraid

You will be prompted to insert the HBA diskette you created.

The installation should proceed normally after this.

NOTES:    This driver is supplied by Dell and therefore all support inquiries
          relating to this driver should be directed to Dell support.

This driver should also work in the same fashion for installing the Dell Poweredge 2650 with the same PERC 3/DI controller.

See also

www.dell.com  bootstring(HW)

From the Xinuos technical article database, record 125161. Reproduced with permission. The original is at www.sco.com/ta/125161, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.