Problem
When I configure a Dial-up Network (DUN) connection from a Windows client to an SCO PPP, MSTPPP or UnixWare 7 server, I am not automatically connected. I must select "bring up terminal window after connecting" and manually enter the PPP account information. If I try to connect without bringing up the terminal window, this error message occurs:
error 650: The computer you are dialing into does not respond to a network request. Check your server type setting in the properties of the connection.
Cause
The only PPP server type offered in the Dial-up Network configuration on Windows is "PPP Internet Windows NT". This connection type does not handle login and password prompts from UNIX servers.
Solution
If username and password are required to establish a PPP connection, use Scripting Support for your Windows Dial-Up Networking connection to automate this process.
A Dial-Up script is a text file that contains the commands, parameters, and expressions expected by the PPP server you are dialing in to. Details on creating the script and making it part of your Dial-Up connection configuration are discussed in your Windows online documentation under "Dial-Up Scripting Command Language".
Windows 95 Version B and Windows 98 offer scripting as part of the Dial-Up Networking configuration options. For earlier versions of Windows 95, Scripting Support for Dial-Up Networking must be added and can be downloaded from:
http://www.microsoft.com/Windows95/downloads/contents/WURecommended/S_WUNetworki ng/W95DialUpNetwkTool/Default.aspThis latest Dial-Up Networking update from Microsoft (version 1.3)
will integrate the 'scripting' tab into the Dial-Up Networking
properties GUI. However, even without the 1.3 DUN update, there is
an installable scripting tool on the Windows 95 installation CD-ROM
that allows you to use scripting, but does not change the DUN
properties GUI. It is called "Dial-Up Networking Scripting Support".Below is a sample script and the steps used to configure the script as part of a dial-up connection from a Windows 98 or Windows 95 Version B system.
On the Windows 98 (or Windows 95 Version B) system, do the following:
1. Create a file that contains the following lines:
proc maindelay 2 transmit "^M" waitfor "ogin:" if $SUCCESS then transmit $USERID transmit "^M" waitfor "ssword:" if $SUCCESS then transmit $PASSWORD transmit "^M" endif endif
endproc2. Name the script file anything you want (for example, "DUscript.txt").
3. Go into Dial-Up Networking, right-click on the SCO connection, and choose 'properties'.
4. Click on 'scripting' and enter the script filename in the box (or browse for the file).
5. Click on 'OK' and try the connection. If it does not work, go
back into the Dial-Up connection's properties -> scripting and
select 'step through script', then click 'OK'. Make the
connection again and step through the login process to see
where it is failing. Adjust the script accordingly.NOTES: If you don't mind handling the PPP login manually, select
"bring up terminal window after connecting" and enter the
login and password for the PPP account manually. See also
ta107596, "How do I configure Windows 95 to connect to OpenServer 5.0.0 using PPP?"