OpenServer 6.0.0 technical articles
591 articles from the Xinuos database that name OpenServer 6.0.0. Showing 551–591 of 591.
- What types of writable optical devices does SCO support?
I want to make backups using an optical device. What products does SCO support?…
- How can I automate the account creation and password assignment process on UnixWare 7?
I want to use a shell script to automate account creation and password assignment on my UnixWare 7 system. How can I make the script handle the interactive passwd command?…
- Users can't log in; they get "cannot change to home directory" and the login: prompt reappears.
I have created several new accounts on my system, but some users cannot log in. They enter the correct account name and password, but they get "CANNOT CHANGE TO HOME DIRECTORY" and are retur…
- After installing SCO UnixWare on a HP/Compaq server it relinks every time I reboot.
I have an HP/Compaq server system with a dual-channel integrated "cpqsc" (Compaq SCSI Ultra Wide) controller for my hard drives and an integrated IDE controller for my CD-ROM drive which I u…
- /etc/passwd is missing or 0-length; can I re-create it from the user information in the tcb directories?
My /etc/passwd file is missing or corrupted, and I have no backups.…
- Creating an easily readable list of hardware on a SCO Unix machine.
My SCO Technical Support Provider has asked for the hardware configuration on my UnixWare 7 machine. How can I create a text file of my hardware configuration that I can email or fax in?…
- What crash recovery features are provided with SCO Unix?
What crash recovery features are provided with SCO UnixWare7 and OpenServer6?…
- How to set up user equivalence between two systems.
I want to set up user equivalence between two systems running SCO TCP/IP.…
- Basic troubleshooting for sendmail.
There are several reasons why sendmail may not work. Follow the steps below to narrow down the problem, and collect information needed to solve the issue.…
- How to set up a basic sendmail configuration.
If you are converting from MMDF to sendmail, see TA107593, "How do I change from MMDF to sendmail in SCO OpenServer Release 5?" for instructions on removing MMDF from your system and install…
- I installed a network interface card (NIC); now I'm having networking problems.
(1) The NIC is configured successfully but doesn't respond or gives errors during reboot;…
- How to turn on ftp logging.
In the file /etc/ftpaccess, uncomment the following line:…
- rcmd/rsh fails with "Permission denied" or rlogin requires a password.
After setting up user equivalence between two systems, rcmd fails with "Permission denied", rlogin requires a password, or rcp fails with "Login incorrect".…
- Which networking utilities consume user licenses in SCO OpenServer and Unixware?
The table below details example commands, whether that command invokes login(M), and whether the login(M) command consumes user licenses on that command's behalf.…
- Get "copy file too large" error when initiating remote print job.
I received the error message "copy file too large" when I initiated a remote print job from the client.…
- What commands are available when running an SMTP or POP session interactively?
I need to connect to port 25 (SMTP) or 110 (POP) interactively. That is, I am troubleshooting a mail problem and I need to know what commands are available to me.…
- How to configure print service to an HP Jet Direct Network Printer?
I want to configure print services to an HP Jet Direct network printer. I configured it as an rlp and it is not working. How do I configure it?…
- How do I tell what security level I'm running?
How do I tell what security level I'm running?…
- I want to clear my system of users who are not logged in.
DOS or Windows TCP/IP clients that have logged into an SCO UNIX system through telnet exit the SCO session normally, but the UNIX "who" command on the SCO system reports them as still logged…
- How can I create a uniprocessor kernel on a multiprocessor UnixWare machine?
How can I build a kernel that forces my multiprocessor SCO UnixWare system to operate as a uniprocessor machine? (This technique can be useful in isolating multiprocessor-specific issues.)…
- UnixWare 2.**, During pass 4 of fsck on a vxfs I get error messages.
During fsck on a vxfs filesystem, I get the following messages:…
- Filesystem Repair Utilities for SCO OpenServer 5 and 6
Filesystem corruption can be caused by the following:…
- What is the maximum number of subdirectories allowed in a directory in UnixWare?
While trying to create a large number of directories I get the error:…
- How can I allow users to enable and disable tty devices? (Or: How can I allow users to run a script as root?)
2. Edit the file /etc/auth/system/authorize. (See authorize(F)). Find the line that reads:…
- I can't print to a network printer that worked under earlier versions of SCO OpenServer
I'm trying to print to a network printer using the hpnpf command. (In some cases, this printer used to work with earlier versions.…
- The find(C) command does not locate files by name when starting from a subdirectory.
I am not seeing consistent behavior using the find(C) command.…
- How can I telnet into a SCO Unix system as the root user?
When trying to telnet into a UnixWare system as root, I get this message:…
- How to check when a SCO OpenServer or Unixware product license was installed or expires.
If an evaluation or limited time COLA (license; certificate of license and authenticity) has been applied to a system, how can the expiration date be checked? Similarly, how can I tell when …
- How can I debug SCO Visual Tcl scripts?
Insert this command line into your Tcl script to enable tracing:…
- How can I monitor disk filesystem space and the syslog automatically?
I want to monitor certain filesystems on my host. If the space left on a particular filesystem is lower than a threshold, the System Administrator should be notified.…
- Why is the License for my SCO Unix expired?
I have just purchased and installed SCO Unix Release x.x and have correctly entered the License Number and the License Code from the "Certificate of License and Authenticity" that I received…
- Rebuild ttys file from inittab including pseudo ttys after crash.
are an indication that the file may be corrupted and/or when I try to login I get pauses during login and messages indicating "can't securely create ttys database".…
- Restoring the contents of certain directories from a cpio backup.
How to restore the contents of certain directories from a cpio backup.…
- How do I convert tabs to spaces in a text file using SCO UNIX/XENIX/OpenServer?
I want to convert all of the tabs in my text file to spaces. Reasons for this include improper indentation when printing, a discrepancy between the operating environment and the file tab siz…
- Generate report of login activity and lock status of users/terminals.
Is it possible to generate a report of the lock status or login activity of terminals and users from the command line or sysadmsh?…
- Minimum length of user account names configurable.
Can user account names be less than 3 characters or more than 8 characters?…
- Is it necessary to type sync before typing haltsys or reboot?
Is it necessary to type sync before issuing the haltsys or reboot commands?…
- Problems changing passwords or creating users after trying to remove NIS
I configured a system to use NIS, but I don't want to run it anymore.…
- Known problems and solutions for NIS in SCO OpenServer Release.
This document lists some known problems with NIS in SCO OpenServer and includes several patches or workarounds.…
- I cannot install SCO FoxBASE+ on SCO OpenServer
During installation the following errors are displayed:…
- I want to know what the /etc/utmp and /etc/wtmp files contain.
I want to view the contents of the /etc/utmp and /etc/wtmp files.…
Other releases: OpenServer 5.0.7 · OpenServer 5.0.6 · OpenServer 5.0.5 · OpenServer Definitive 2018 · OpenServer 5 · OpenServer 6
Running OpenServer 6.0.0?
These articles are the vendor's own. If you would rather have the work done, or something is broken right now, tell us what the system is doing.
- You deal with the people who do the work
- No obligation, and no upgrade required before we will help
- We tell you plainly if something is not worth doing