Technical article 101108

I cannot install SCO FoxBASE+ on SCO OpenServer

OpenServer 6.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

During installation the following errors are displayed:

sed: Cannot open: ./tmp/perms/prep/*/prep.message: No such file or directory (error 2)
cat: cannot open /tmp/<NUMBER>: No such file or directory (error 2)
?

<NUMBER> is a process ID, and will vary from installation to installation.

This prevents SCO FoxBASE+ from being installed.

Solution

To work around this problem, take these steps:

1. Switch to a text multi-screen on the system console - you MUST do this, as the following does not work on the graphical multi-screen.

2. Log in as root and run "custom".

3. Install FoxBASE+ as before.

4. After the error occurs, press the <Del> key (at the "?" prompt).

5. Type "i" to ignore the error.

6. Continue with the installation as normal.

SCO FoxBASE+ will now be installed on the system.

NOTE:     SCO FoxBASE+ 2.1.2 is not supported on any release of
          SCO OpenServer 5.

From the Xinuos technical article database, record 101108. Reproduced with permission. The original is at www.sco.com/ta/101108, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.