Technical article 105618

SCO Internet to NetWare Gateway status reports "Error opening SPX device".

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

If the SCO Internet to NetWare Gateway Administration utility "/usr/bin/mcsadm" is run, it reports the following error when the gateway "Status" is queried;

===========================================================
                 Inetix Gateway
                     Error
===========================================================
SYSTEM ERROR:  Error opening SPX device.
errno = 6 (No such device or address)
inetix[misc.c, 130]

Cause

The underlying IPX/SPX daemon "/etc/npsd" is no longer running. This may be due to the fact that IPX/SPX has been turned off on the system, or more usually indicates some fault with the daemon/network.

Solution

If possible, restart IPX/SPX using "ipx restart". If the problem is seen later once IPX/SPX has been running, general investigation can be done using the following commands/utilities:

- Check settings for IPX/SPX with netconfig(ADM).

- getlan(PADM) displays information about the IPX/SPX and LLI interfaces.

- llistat(ADM)
- showsvcs(PADM)
- track(PADM)
- nping(PADM)

- IPX/SPX tunable parameters in the "XXX_tune.h" files within the "/etc/conf/pack.d/ ...[ ipx/spx/nvt ]" directories.

See also

SCO OpenServer 5.0 Networking Guide, Chapter 2, "Administering SCO IPX/SPX".

TA105578, "SCO Internet to NetWare Gateway fails to start with "Error opening IPX device ".

From the Xinuos technical article database, record 105618. Reproduced with permission. The original is at www.sco.com/ta/105618, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.