Problem
My old User and CPU licenses are not accepted after an upgrade to OpenServer 5.0.7. Nor does my new Development System license.
Solution
Download and install SCO Support Level Supplement (SLS) OSS656B from:
https://ftp.scoexpert.com/openserver5/oss656bNOTE: OSS656B has been superceeded by SCO OpenServer Release 5.0.7
Maintenance Pack 1. Maintenance Pack 1 can be downloaded from:http://www.sco.com/support/update/download/osr507mp.htmlFor Installation Instructions, Problem Fixes and Known Problems please see the Maintenance Pack 1 Release Notes at:
https://ftp.scoexpert.com/openserver5/osr507mp/osr507mp1.htm See also
TA125201 "What is SCO OpenServer Release 5.0.7 Maintenance Pack 1 and where can I download it?"
----------------------------------------------------------------------------
Dear Customer,Support Level Supplement (SLS) OSS656B, the OpenServer 5.0.7 Licensing Update provides an updated brand(ADM) command that properly recognizes your previous User and CPU licenses on 5.0.7, and a new policy manager that fixes a bug that was preventing system restores from working.
This supplement can be installed on the following SCO OpenServer releases:
SCO OpenServer Release 5.0.7----------------------------------------------------------------------------
I. Software Notes and Recommendations1. If you have any questions concerning this supplement, please contact your SCO software supplier or your SCO Support Representative.
----------------------------------------------------------------------------
II. Installation InstructionsTo install OSS656B follow these steps:1. Download the OSS656B media image files from:
https://ftp.scoexpert.com/openserver5/oss656b2. Place the files in the /tmp directory.
3. Run the Software Manager with the command:
# scoadmin softwareor double-click on the Software Manager icon in the desktop.
4. Pull down the "Software" menu and select "Install New".
5. When prompted for the host from which to install, choose the local machine and then "Continue".
6. In the "Select Media" menu, pull down the "Media Device" menu. Select
"Media Images", then choose "Continue".7. When prompted for the "Image Directory", enter "/tmp" (or the directory where you placed the VOL files in step 2) and choose "OK".
8. When prompted to select software to install, make sure that the "OSS656B"
entry is highlighted. Choose "Install".9. Installation of SLS OSS656B is now complete. To exit the Software
Manager, select "Exit" from the "Host" menu.-----------------------------------------------------------------------------
III. Removal InstructionsNote: Patches must be rolled back in the reverse order in which they were installed on a per-component basis.
1. Log in as root.2. Execute the command:# scoadmin softwareordouble-click on the Software Manager icon in the desktop.
3. Highlight "OSS656B - OpenServer Licensing Update ".
4. Pull down the "Software" menu and select "Remove Software".
5. Once the removal finishes, quit the Software Manager. Removal of
SLS OSS656B is now complete.----------------------------------------------------------------------------
Copyright 2003, The SCO Group Inc, All rights reserved