Technical article 119732

What is Support Level Supplement (SLS) OSS653A, the Initial VGA Recognition Supplement?

OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written

Problem

What is SLS OSS653A, the Initial VGA Recognition Supplement for OpenServer 5?

Solution

SLS OSS653A, the Initial VGA Recognition Supplement for OpenServer 5, addresses the following problem:

Some systems incorrectly initialize the Primary Display Type bits in the CMOS Equipment Byte (0x14). This can cause OpenServer to incorrectly identify the video as CGA or Mono instead of VGA. OpenServer relies on reading the Primary Display Type bits to determine which video driver to use.

This can cause a variety of symptoms including:

Black or Blank screen Invisible or unreadable fonts Half letter fonts Squished or Scrunched screen

	  You may also see a boot message or hwconfig output that reads:
	  %console -   -   -  unit=cga ...

These problems can come about during a new installation, after replacing a motherboard, or upgrading the CMOS or system BIOS, or any other method that could introduce a new CMOS.

The problem has been observed on certain Intel 845 series motherboards, as well as IBM, Gateway and Compaq systems and systems using AMI BIOS issued between early 2002 and mid-2003.

Besides this btld patch, this problem could also be fixed by correcting the CMOS by applying a BIOS upgrade, if one is available.

See the attached cover letter for more information, including installation instructions.

------------------------------------------------------------------------
Dear SCO Customer,

Support Level Supplement (SLS) OSS653A, the Initial VGA Recognition Supplement for OpenServer 5, addresses the following problem:

	  Some systems incorrectly initialize the Primary Display Type bits
	  in the CMOS Equipment Byte (0x14). This can cause OpenServer to
	  incorrectly identify the video as CGA instead of VGA.  OpenServer
	  relies on reading the Primary Display Type bits to determine which
	  video driver to use.

This can cause a variety of symptoms including:

Black or Blank screen Invisible or unreadable fonts Half letter fonts Squished or Scrunched screen

	  You may also see a boot message or hwconfig output that reads:
	  %console -   -   -  unit=CGA or MONO ...

These problems can come about during a new install, after replacing a motherboard, or upgrading the CMOS or system BIOS, or any other method that could introduce a new CMOS.

The problem has been observed on certain Intel 845 series motherboards, as well as IBM, Gateway and Compaq systems and systems using AMI BIOS issued between early 2002 and mid-2003.

Besides this btld patch, this problem could also be fixed by correcting the CMOS by applying a BIOS upgrade, if one is available.

SLS OSS653A is a Boot Time Loadable Driver (BTLD) which will force the OS to choose the VGA driver.

Software Notes and Recommendations
----------------------------------
SLS OSS653A can be used with:

SCO OpenServer Release 5.0.7 SCO OpenServer Release 5.0.6 SCO OpenServer Release 5.0.5 SCO OpenServer Release 5.0.4 SCO OpenServer Release 5.0.2

Installation Instructions
-------------------------

1. Download the OSS653A media image file from:

	     https://ftp.scoexpert.com/openserver5/oss653a.btld.Z

Place the file in the /tmp directory, and extract it to a formatted floppy with this command:

zcat /tmp/oss653a.btld.Z > /dev/fd0

2. To use this new BTLD floppy, boot the system with the bootstring:

Boot
: defbootstr link=ivga

If you have questions regarding this SLS, or the product on which it is installed, please contact your software supplier.

From the Xinuos technical article database, record 119732. Reproduced with permission. The original is at www.sco.com/ta/119732, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.