Technical article 125428

What Symbios Logic/LSI Logic Host Adapters are supported by the slha Host Adapter driver?

OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

What Symbios Logic/LSI Logic Host Adapters are supported by the slha Host Adapted driver?

HARDWARE: Symbios 53C810 (all 53c8xx SCSI I/O processors)
          Symbios 53C810A
          Symbios 53C815
          Symbios 53C825
          Symbios 53C825A
          Symbios 53C860
          Symbios 53C875
          Symbios 53C8751
          Symbios 53C875J
          Symbios 53C876
          Symbios 53C895
          Symbios 53C896
          LSI53C1010
          LSI53C1010R
          LSI53C1000
          LSI53C1000R
NOTE:     This driver package is to be installed on:
SCO OpenServer 5.0.6a, 5.0.7

Solution

These drivers are available at the following URL:

https://ftp.scoexpert.com/openserver5/drivers/OSR507/btld/slha/

To install these drivers, follow these instructions:

1. Acquire the driver from the ftp address listed above.

- Download the btld image to a directory/file on your machine. For example, /tmp/slha.btld

- Verify the downloaded image using sum.

sum -r /tmp/slha.btld
This should return:
26311  1440 /tmp/slha.btld

- Format a floppy disk using the format command

- Copy the downloaded image to the floppy:

dd if=/tmp/slha.btld of=/dev/fd0 bs=18k

- Verify the copied floppy image using sum:

sum -r /dev/fd0
This should return:
26311  1440 /dev/fd0
2a. Fresh Installation on Primary Drive

- Insert a boot disk or Installation CD and boot the system.

- At the boot prompt, type:
defbootstr link=slha

- Press <Return> and continue with normal installation.

2b. Installation on a Secondary Drive
- Boot and Login normally.
- Mount the floppy image:
mount -r /dev/fd0 /mnt

- Use the BTLD Install script to install the driver:

/etc/btldinstall /mnt

Once the kernel has been relinked, reboot the host and verify that the driver is initializing the card. The boot time banner should look something like:

%adapter   0xec00-0xecff  11  -  type=slha ha=0 slot=0 bus=0 id=7 fts=sto

When the adapter is installed and the boot-time banner is properly displayed, you may use the appropriate mkdev script to add a disk, tape, or cdrom to the Ultra SCSI Bus.

NOTE:     Installation of Release Supplement 5.0.6a (RS506a) onto a system
          with this new SLHA driver installed will result in kernel relink
          errors similar to:

i386ld:Symbol numHBAs in /var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/slha/space.o is multiply defined. First defined in /var/opt/K/SCO/link/1.1.1Ga/etc/conf/pack.d/slha/Driver.o ERROR:Can not link-edit unix system build failed Error:kernel link failed Error Stack:Kernel link failed

If you have installed RS506a and are getting the above errors, you will need to reapply the the SHLA BTLD as described in step 2b above before rebooting your system to correct the problem.

See also

TA125542, "What LSI Logic Host Adapters are supported by the lsil Host Bus Adapter driver?"

From the Xinuos technical article database, record 125428. Reproduced with permission. The original is at www.sco.com/ta/125428, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.