Problem
When my OpenServer system no longer boots up I get the error:
unix not found. Cause
If the system displays the unix not found message after the system starts to boot, the unix file is missing. The unix file contains the bootable image of the UNIX system kernel.
Solution
One possible solution is to boot from another kernel file, (such as
unix.old, unix.install or unix.safe) by entering the alternate kernel
name at the "Boot:" prompt.If there are no other kernel files on the system, boot the system from the emergency boot floppy disk set so that you can restore the unix file:
1. Insert the boot floppy disk in the drive and reboot the machine.
2. At the Boot: prompt, enter:fd(60)unix.Z root=hd(42) swap=hd(41)This loads the kernel from the boot floppy disk and mounts the root filesystem on the hard disk.
3. Bring up the system in single-user mode by entering the root password at the prompt.
4. The kernel you loaded from the boot disk does not include any changes you've made since creating your emergency boot floppy disk set. You should immediately relink your kernel.
To relink the kernel, type: /etc/conf/cf.d/link_unix -yWhenever you make changes to your system configuration such as adding new or updated drivers, new hardware, etc., this causes a relink of the kernel and you should then re-create a new emergency boot floppy disk set.