Technical article 126839

Where can I get pre-created Openserver 5.0.7 Boot CD image that contains commonly used BTLD?

OpenServer 5.0.7

Written · Last revised

Problem

In TA126828, "How can I, during SCO OpenServer 507 installation, load a BTLD via CD-ROM (Not via a floppy drive)?" talks about how to build a OSR 5.0.7 BTLD CD to use for installation.

I don't know how to create a BTLD CD ISO image.

Is there a place where I can download pre-generated BTLD Boot CD for the latest Host Bus Adapters (HBAs) that are not supported by the SCO OpenServer 5.0.7 Base Operating System CD1?

Solution

SCO has created BTLD ISO images for an number of HBAs that are not included in the OpenServer 5.0.7 Media.

These BTLD Boot CD's are available on ftpput.sco.com. Since ftpput.sco.com/tmp is a restricted area, "dir" or "mget" will fail.

To download you need to use the URL below as shown.

1- LSI "lsil" BTLD ver. 1.04.09 (From SCO website)

ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-lsil.iso

2- HP "hpsas" BTLD ver. 5.770a (From HP PSP 5.770a)

This is a vendor supported driver.
ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-hpsas.iso

3- HP "hpsas" BTLD ver. 5.790a (From HP PSP 5.790a)

This is a vendor supported driver.
ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-hpsas-5.790a.iso

4- HP "ciss" BTLD ver. 5.770a (From HP PSP 5.770a)

This is a vendor supported driver.
ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-ciss.iso

5- HP "ciss" BTLD ver. 5.790a (From HP PSP 5.790a)

This is a vendor supported driver.
ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-ciss-5.790a.iso
6- Adaptec "aacraid" ver. 9177 (From Adapatec Website)
This is a vendor supported driver.
ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-Adaptec-aacraid.iso

7- IBM ServerRAID "aacraid" ver. 9257 (extracted from IBM ServerRAID CD release 4.80)

This is a vendor supported driver.
ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-IBM-aacraid.iso

8- SCO OpenServer later "wd" BTLD from the OpenServer

5.0.7 Supplement 5 BTLD ISO Image (From SCO website)

ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-wd.iso

9- SCO OpenServer latest version 3.0 "wd" BTLD for OpenServer 5.0.7 (From SCO website)

ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-wd-v3.iso

10-HP "ida" BTLD ver. 5.42a (From HP EFS 5.42a)

This is a vendor supported driver for the Compaq Smart Array 3200 legacy range.

ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-ida.iso

11-HP "clad" BTLD ver. 5.42a (From HP EFS 5.42a)

This is a vendor supported driver for the Compaq Smart Array 431 legacy range.

ftp://ftpput.sco.com/tmp/support/ISO/iso-btld/osr507boot-CD-clad.iso

You can then use any CD iso burning software (e.g. cdrecord) to burn the above iso Boot-BTLD images on a CD-R/RW media.

To install OSR507, with one of these BTLD Boot CD's, just follow TA126828 from Step 10, eg:

defbootstr link=fd(64)hpsas
NOTES:    You only use these BTLD Boot CD's if loading BTLD via a
          USB floppy drives fail.

For any of the above controllers, if a new version of the BTLD drivers are released, then SCO plan to update the BTLD Boot CD for that controller on the ftpput.sco.com FTP site.

See also

TA126828 - How can I, during SCO OpenServer 507
             installation, load a BTLD via CD-ROM
             (Not via a floppy drive)?

From the Xinuos technical article database, record 126839. Reproduced with permission. The original is at www.sco.com/ta/126839, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.