Technical article 125505

Why do some OpenServer systems show "/etc/init -a" and others only show "/etc/init" in the process table?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

In the process table on OpenServer 5 systems, some show the following process:

   root     1     0  0 07:39:38       ?    00:00:00
/etc/init -a

When other system show this process instead:

   root     1     0  0 07:39:38       ?    00:00:00
/etc/init
Why is this?

Cause

The -a option to /etc/init is a flag given to it when the
system is autobooted.  The system is autobooted when
nothing is entered at the boot: prompt when the system is
booted.

Solution

There is no harm or differences in system performance,
behavior or symptoms when running "/etc/init -a" opposed
to "/etc/init".  It is only a matter of what gets run
prior to going into mutliuser mode, for example, the user
will not be prompted if the system should go into single
user mode.

From the Xinuos technical article database, record 125505. Reproduced with permission. The original is at www.sco.com/ta/125505, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.