Technical article 125761

Can I use my USB CDROM/Floppy drive to install software using the Software Manager?

OpenServer 5.0.7

Written · Last revised

Problem

Can I use my USB CDROM/Floppy drive to install software using the Software Manager?

When I run the Software Manager and select:

Software -> Install New...

the Media Device: list does not include my USB CDROM drive.

Cause

The Software Manager uses a Device Query Interface to query for a list of available devices that it can install from. This Device Query Interface does not currently recognize USB Mass Storage devices like CDROM and Floppy drives.

Solution

The Software Manager (custom+) does not currently support the installation of software from a CDROM/Floppy Device that is connected via a USB interface.

To workaround this limitation if you are installing from CD, you should either:

1) Insert the software CD into an IDE or SCSI CDROM drive that is connected to your server and choose this device when asked to at the Media Device: prompt in the Software Manager

2) Mount the software CD and copy the VOL images that you want to install onto the hard drive. Then point the Software Manager at the Media Images on the hard drive.

To workaround this limitation if you are installing from floppy you should either:

1) Insert the floppy into a non-USB floppy drive that is connected to your server and choose this device when asked to at the Media Device: prompt in the Software Manager

2) Extract the VOL images that you want to install from the floppy disk onto the hard drive. Then point the Software Manager at the Media Images on the hard drive.

This problem has been reported to SCO Engineering and will be fixed in a future release of SCO OpenServer 5.

From the Xinuos technical article database, record 125761. Reproduced with permission. The original is at www.sco.com/ta/125761, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.