Technical article 127697

Can't add second IDE disk to VMware Workstation

OpenServer 5.0.7

Written · Last revised

Problem

I'm running a native OpenServer 5.0.7 (not the V version) on VMware Workstation 7.1.5 using an IDE disk. Now I want to add a second IDE disk. I added a 2nd IDE disk to VMware as slave on the first controller.

When I run "mkdev hd" for the second time it fails with

Do you wish to continue? (y/n) y

The hard disk installation program will now invoke /etc/dkinit. Entering 'q' at the following menu will exit /etc/dkinit, and the hard disk installation will continue.

If you wish to exit the entire installation at this menu, press the <DEL> key.

dparam: could not open special device: No such device or address

Hard Disk Drive 2 Configuration

/etc/fdisk: cannot open /dev/rdsk/2s0 for reading: No such device or address (error 6) /etc/fdisk failed.

Solution

To add the second IDE disk run
# mkdev hd 1 0

This tells mkdev hd to add the disk as slave to the first IDE controller.

See also

Run "mkdev hd -u" to get further informations about the usage of "mkdev hd".

From the Xinuos technical article database, record 127697. Reproduced with permission. The original is at www.sco.com/ta/127697, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.