Technical article 125745

Cannot configure TCP/IP on a Network Card on my UnixWare 7.1.4 system.

UnixWare 7.1.3UnixWare 7.1.4

Written · Last revised

Problem

I am running netcfg(1M) to configure TCP/IP on a network card on UnixWare 7.1.4 and I get the following error message:

A problem occurred while the following products were being added to the system: TCP/IP <Name of the Network being configured>

Review the error log for more information
(/usr/lib/netcfg/tmp/pop.log)

The pop.log file referenced in the error contains:

netcfg: Unable to execute /usr/lib/netcfg/init/tcp
UX:initialize: ERROR: No such interface: net1

Cause

This error can occur if the permissions on the file:

/usr/lib/netcfg/init/tcp

are changed from 755 to 644. This can happen under certain circumstances if OKP is installed on your system.

Solution

To solve this problem, log into the server as root user and run the command:

chmod +x /usr/lib/netcfg/init/tcp
You should now find that you can configure TCP/IP using
netcfg(1M).

From the Xinuos technical article database, record 125745. Reproduced with permission. The original is at www.sco.com/ta/125745, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.