Technical article 127811

Host Bus Adapter (HBA) Driver Supplement - megasas Driver version 2013.11.05

OpenServer 6.0.0UnixWare 7.1.4

Written

Problem

Need support for recent LSI MegaRAID SAS Host Adapters.

Solution

The megasas Driver Supplement provides the following driver:

megasas - LSI MegaRAID SAS HBA Version 2013.11.05

Version 2013.11.05 of the megasas driver contains the latest support for LSI MegaRAID controllers and supersedes prior driver versions provided by LSI and Xinuos, including versions 1.0, 1.1, 4.05, and 5.03.

This driver can be used during fresh installation of any supported
UnixWare 7.1.4+, OpenServer 6, or UnixWare 7.1.4 system or can be
applied to an existing system.  Note that the UnixWare 7.1.4+ ISL
includes this version of the driver, so it is not necessary to
downlaod the driver image separately if you are installing from
the UnixWare 7.1.4+ ISL CD.
The megasas driver is provided in both hba.megasas.2013.11.05.image,
a dd image of an HBA diskette, and hba.megasas.2013.11.05.iso, an ISO
image of an HBA CDROM.  Both images are available at the following
URLs:
https://ftp.scoexpert.com/unixware7/714/drivers
https://ftp.scoexpert.com/openserver6/600/drivers
Installation instructions are given below.

Hardware supported by this driver is as follows.

LSI SAS2208 Chipset
-------------------
Version 2013.11.05 of the megasas driver supports the following
LSI MegaRAID SAS HBA controllers based on the LSI SAS2208 chipset:

LSI MegaRAID SAS 9265-8i LSI MegaRAID SAS 9265CV-8i LSI MegaRAID SAS 9266-4i LSI MegaRAID SAS 9266-8i LSI MegaRAID SAS 9267-8i LSI MegaRAID SAS 9270-4i LSI MegaRAID SAS 9270-8i LSI MegaRAID SAS 9270CV-8i LSI MegaRAID SAS 9271-8i LSI MegaRAID SAS 9272-8i LSI MegaRAID SAS 9285-8e LSI MegaRAID SAS 9285CV-8e LSI MegaRAID SAS 9286-8e LSI MegaRAID SAS 9286CV-8e Dell PERC H810 Adapter Dell PERC H710 Embedded Dell PERC H710P Adapter Dell PERC H710P Mini (blades) Dell PERC H710P Mini (monolithics) Dell PERC H710 Adapter Dell PERC H710 Mini (blades) Dell PERC H710 Mini (monolithics) Intel (R) RAID Controller RS25DB080 Intel (R) RAID Controller RS25NB008

Version 2013.11.05 is expected to support the following HBA controllers based on the SAS2208 chipset, though these are not certified:

Intel Integrated RAID Module RMS25CB040 Intel Integrated RAID Module RMS25CB080 Intel Integrated RAID Module RMS25PB040 Intel Integrated RAID Module RMS25PB080 Intel Integrated RAID Module RMT3CB080 Intel Integrated RAID Module RMT3PB080 Intel RAID Controller RS25AB080 Intel RAID Controller RS25NB008 Intel RAID Controller RS25SB008

LSI SAS2108 Chipset
-------------------
Version 2013.11.05 supports the following LSI MegaRAID SAS HBA
controllers based on the LSI SAS2108 chipset:

LSI MegaRAID SAS 9260-16i LSI MegaRAID SAS 9260-4i LSI MegaRAID SAS 9260-4ix LSI MegaRAID SAS 9260-8i LSI MegaRAID SAS 9260-8ix LSI MegaRAID SAS 9260CV-4i LSI MegaRAID SAS 9260CV-8i LSI MegaRAID SAS 9261-8i LSI MegaRAID SAS 9262-8i LSI MegaRAID SAS 9264-8i LSI MegaRAID SAS 9280-16i4e LSI MegaRAID SAS 9280-24i4e LSI MegaRAID SAS 9280-4i4e LSI MegaRAID SAS 9280-8e LSI MegaRAID SAS 9280-8ex LSI MegaRAID SAS 9280CV-4i4e LSI MegaRAID SAS 9280CV-8e LSI MegaRAID SAS 9281-8E LSI MegaRAID SAS 9282-8e Dell PERC H800 Adapter Dell PERC H700 Adapter Dell PERC H700 Integrated Dell PERC H700 Modular Dell PERC H700 Dell PERC H800 Proto Adapter Dell PERC H800

Version 2013.11.05 is expected to support the following HBA controllers based on the SAS2108 chipset, though these are not certified:

Intel Integrated RAID Module RMS2MH080 Intel RAID Controller RS2BL040 Intel RAID Controller RS2BL080 Intel RAID Controller RS2BL080DE Intel RAID Controller RS2MB044 Intel RAID Controller RS2PI008 Intel RAID Controller RS2PI008DE Intel RAID Controller RS2SG244 Intel RAID Controller RS2VB040 Intel RAID Controller RS2VB080 Intel RAID Controller RS2WG160 Intel RAID Controller RT3WB080

LSI SAS2008 Chipset
-------------------
Version 2013.11.05 supports the following LSI MegaRAID SAS HBA
controllers based on the LSI SAS2008 chipset:

LSI MegaRAID SAS 9240-4i LSI MegaRAID SAS 9240-8i Dell PERC H310

Version 2013.11.05 is expected to support the following HBA controllers based on the SAS2008 chipset, though these are not certified:

IBM ServeRAID M1015 IBM ServeRAID M1115 Intel RS2WC080 Intel RMS2AF040 Intel RMS2AF080

Retired Controllers
-------------------
Version 2013.11.05 is expected to support the following retired
LSI controllers:

MegaRAID SAS 8704ELP MegaRAID SAS 8704EM2 MegaRAID SAS 8708ELP MegaRAID SAS 8708EM2 MegaRAID SAS 8880EM2 MegaRAID SAS 8888ELP MegaRAID SAS 8308ELP MegaRAID SAS 8344ELP MegaRAID SAS 84016E MegaRAID SAS 8408E MegaRAID SAS 8480E MegaRAID SATA 300-8ELP

-------------------------------------------------------------------------
I. Installation

While installing OpenServer 6 or UnixWare 7.1.4, be sure to insert the megasas Driver Supplement media before any HBA drivers supplied with your media kit.

If you are planning on installing the driver from an HBA CD, then use the the following steps on an existing OpenServer 6 or UnixWare 7 system to create an HBA CD from the HBA ISO image file:

1. Become root and create a new directory by typing:

$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba

2. Download the hba.megasas.2013.11.05.iso file to the newly created /tmp/hba directory on your machine.

3. Make an megasas HBA CD from the iso file using this command:

# cdrecord -v -dev=c,b,t -dao -driveropts=burnfree \
     -speed=99 hba.megasas.2013.11.05.iso

where c,b,t is taken from the output of cdrecord --scanbus

4. Use this megasas HBA CD during system installation.

If you are planning on installing the driver from an HBA diskette, then use the following steps on an existing OpenServer 6 or UnixWare 7 system to create an HBA diskette from the HBA diskette image file:

1. Become root and create a new directory by typing:

$ su
Password: <type your root password>
# mkdir /tmp/hba
# cd /tmp/hba

2. Download the hba.megasas.2013.11.05.image file to the newly created /tmp/hba directory on your machine.

3. Make an megasas HBA diskette from the image file using this command:

# dd if=hba.megasas.2013.11.05.image of=/dev/dsk/f0t obs=36b

4. Use this megasas HBA diskette during system installation.

NOTE:  If using a USB Floppy Drive during system installation, leave the drive
       connected throughout the installation until after the system reboots.
------------------------------------------------------------------------
II. Upgrading drivers on existing system

The megasas HBA CD can also be used to upgrade the megasas driver on an existing UnixWare 7.1.4+, OpenServer 6, or UnixWare 7.1.4 system using the following command:

1. Insert the HBA driver CD and type the command:

# pkgadd -d cdrom1 all
or
# pkgadd -d cdrom1 megasas

The megasas HBA diskette can also be used to upgrade the megasas driver on an existing UnixWare 7.1.4+, OpenServer 6, or UnixWare 7.1.4 system using the following command:

1. Insert the HBA driver diskette and type the command:

# pkgadd -d diskette1 all
or
# pkgadd -d diskette1 megasas
------------------------------------------------------------------------
III. Software Notes

This driver has been tested with and is supported on:

SCO UnixWare 7 Release 7.1.4+ SCO OpenServer Release 6.0.0 SCO UnixWare 7 Release 7.1.4

From the Xinuos technical article database, record 127811. Reproduced with permission. The original is at www.sco.com/ta/127811, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.