Technical article 127464

Cannot connect via TCP/IP to my newly imported and configured SCO OpenServer 5.0.7V Virtual Machine

OpenServer 5.0.7

Written · Last revised

Problem

I have just imported and configured my SCO OpenServer 5.0.7V Virtual Machine and but I cannot connect to it from another system.

Solution

This problem is sometimes seen in situations where the system you are attempting to connect from has a stale ARP Cache or one (or more) of the devices on the route between your system and the SCO OpenServer 5.0.7V Virtual Machine has a stale ARP Cache. The ARP Cache can become stale when you re-import and configure your SCO OpenServer 5.0.7V Virtual Machine and in the process VMware has assigns a new MAC address to the Virtual Machine. If you dont let your SCO OpenServer 5.0.7V Virtual Machine autoboot after configuration then it will not send out an ARP Request and therefore the ARP Caches of other systems on the network may contain stale entries.

To solve this problem login to the OpenServer 5.0.7V virtual machine and ping the device with the stale cache or the server you are failing to connect from.

The following solutions have also been reported to work in some situations:

- On the server you are failing to connect from run:

arp -d <hostname>

where <hostname> is replaced by the hostname of the SCO OpenServer 5.0.7 Virtual Machine.

- Reboot your SCO OpenServer 5.0.7 Virtual Machine and let it autoboot.

From the Xinuos technical article database, record 127464. Reproduced with permission. The original is at www.sco.com/ta/127464, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.