Technical article 125215

Drivers for the Adaptec Ultra SCSI 29320/39320 Host Bus Adapters

OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

What drivers are available for the Adaptec Ultra320 SCSI Host Adapters?

NOTE:     This driver package is to be installed on:
	  	SCO OpenServer 5.0.6a, 5.0.7

Solution

These drivers are available at the following URL:

	  https://ftp.scoexpert.com/openserver5/drivers/OSR507/btld/ad320/
	  Modification History
	  ********************
          5.0.6, 5.0.7 - Base release, 8/01/2003

To install these drivers, follow these sets of instructions:

1. Acquire the driver from the ftp listed above.

- Download the btld image to a directory/file on your machine. For example, /tmp/ad320.btld

- Verify the downloaded image using sum:

	    sum -r /tmp/ad320.btld
This should return:
55768  1440 /tmp/ad320.btld

- Format a floppy media using the format command.

          - Copy the downloaded image to the floppy,
	    dd if=/tmp/ad320.btld of=/dev/fd0 bs=18k

- Verify the copied floppy image using sum:

	    sum -r /dev/fd0
This should return:
55768  1440 /dev/fd0

- Shutdown the host and install the Adaptec controller.

2a. Fresh Installation on Primary Drive - Insert a boot disk or Installation CD and boot up the system. - At the boot prompt type: defbootstr link=ad320 - Hit return and continue with normal installation.

	2b. Secondary Drive Installation
          - Boot and Login normally.
	  - Mount the floppy image
	    mount -r /dev/fd0 /mnt

- Use the BTLD Install script to install the driver. /etc/btldinstall /mnt

Once the kernel has been relinked reboot the host and verify that the driver is initializing the card. The boot time banner should look much like,

%adapter      0xec00-0xecff  11   -   type=ad320 ha=0 slot=0 bus=0 id=7 fts=sto
	  If you are installing this machine fresh with no additional operating
          systems or disks configured on the Adaptec Ultra320 adapter, it
          is recommended that you disable "Extended Int 13 Translation for
          DOS Drivers >  1 Gbyte"

This is found in the Adaptec SCSI BIOS configuration Under "Advanced Configuration". If this is not a fresh install do not disable this option because it will make the contents of existing disks inaccessible.

When the adapter is installed and the boot time banner is properly displayed, you may use the appropriate mkdev script to add a disk, tape, or cdrom to the Ultra SCSI Bus.

Currently this version of the ad320 supports the use of up to two host bus adapters. Dual channel controllers count as two separate adapters.

From the Xinuos technical article database, record 125215. Reproduced with permission. The original is at www.sco.com/ta/125215, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.