Problem
What drivers are available for the Adaptec Ultra320 SCSI Host Adapters?
NOTE: This driver package is to be installed on: SCO OpenServer 5.0.6a, 5.0.7 Solution
These drivers are available at the following URL:
https://ftp.scoexpert.com/openserver5/drivers/OSR507/btld/ad320/ Modification History
********************5.0.6, 5.0.7 - Base release, 8/01/2003To install these drivers, follow one of the sets of instructions:
1. Fresh Installation on Primary Drive - Shutdown the host and install the Adaptec controller. - Insert a boot disk or Openserver Installation CD and boot up the system. - At the boot prompt type: defbootstr link=ad320 - Hit return and continue with normal installation.
2. Secondary Drive Installation - Log in as root.
- Download the btld image(s) to your machine to a directory/file, for example, /tmp/ad320.btld.
- Verify the downloaded image using sum,
sum -r /tmp/ad320.btld
55768 1440 /tmp/ad320.btld- Format a floppy media using the format command.
- Copy the downloaded image to the floppy,
dd if=/tmp/ad320.btld of=/dev/fd0 bs=18k - Verify the copied floppy image using sum,
sum -r /dev/fd0
55768 1440 /dev/fd0 - Mount the floppy image
mount -r /dev/fd0 /mnt- Use the BTLD Install script to install the driver. /etc/btldinstall /mnt
Once the kernel has been relinked, shutdown the host and install the Adaptec controller. Reboot the host and verify that the driver is initializing the card. The boottime banner should look much like,
%adapter 0xec00-0xecff 11 - type=ad320 ha=0 slot=0 bus=0 id=7 fts=sto If you are installing this machine fresh with no additional operating
systems or disks configured on the Adaptec Ultra320 adapter, it is
recommended that you disable "Extended Int 13 Translation for DOS
Drivers > 1 Gbyte". This is found in the Adaptec SCSI BIOS
configuration Under "Advanced Configuration".If this is not a fresh installation do not disable this option because it will make the contents of existing disks inaccessible.
When the adapter is installed and the boottime banner is properly displayed, you may use the appropriate mkdev script to add a disk, tape, or cdrom to the Ultra SCSI Bus.