Problem
What driver is available for the Broadcom NetXtreme HARDWARE listed below?
HARDWARE: Please see the below listing of cards:
Note1: The format of the below is Vendor.ID.DeviceID: chipset/board name
subVendorID.SubDeviceID: board nameboard_id (VendorID.DeviceID) / subboard_id (subVendorID.subDeviceID) are provided in hexadecimal format.
Note 2: To obtain the board_id, type the following as root: "hw -r bus -v | egrep 'VendorId|DeviceId'" or "hw -r bus -v | egrep 'VendorId|DeviceId|SubsysVendorID|SubsystemDeviceID'" and concatenate the pair of 4 digit hex numbers of each (ie. If the VendorId is 0x1234 and the DeviceId is 0x5678, then the board_id to look for below, would be '1234.5678').
The following NetXtreme Server cards are supported:
14E4.1644: Broadcom NetXtreme Gigabit Ethernet BCM5700 14E4.1645: Broadcom NetXtreme Gigabit Ethernet BCM5701 0E11.007C: HP NC7770 Gigabit Server Adapter 0E11.0085: HP NC7780 Gigabit Server LOM 0E11.00C1: HP NC6770 Gigabit Server Adapter 14E4.1647: Broadcom NetXtreme Gigabit Ethernet BCM5703 14E4.16A7: Broadcom NetXtreme Gigabit Ethernet BCM5703 0E11.00CA: HP NC7771 Gigabit Server Adapter 0E11.00CB: HP NC7781 Gigabit Server LOM 14E4.16C7: Broadcom NetXtreme Gigabit Ethernet BCM5703 14E4.1648: Broadcom NetXtreme Gigabit Ethernet BCM5704 0E11.00D0: HP NC7782 Gigabit Server Adapter 0E11.00D1: HP NC7783 Gigabit Server Adapter 14E4.16A8: Broadcom NetXtreme Gigabit Ethernet BCM5704S 14E4.1668: Broadcom NetXtreme Gigabit Ethernet BCM5714 103C.7039: HP NC324i Integrated Dual Port PCIe Gigabit Server Adapter 14E4.1669: Broadcom NetXtreme Gigabit Ethernet BCM5714 103C.703A: HP NC324i Integrated Dual Port PCIe Gigabit Server Adapter 14E4.1678: Broadcom NetXtreme Gigabit Ethernet BCM5715 103C.703E: HP NC326i Integrated Dual Port PCIe Gigabit Server Adapter 14E4.1679: Broadcom NetXtreme Gigabit Ethernet BCM5715 103C.703C: HP NC326i Integrated Dual Port PCIe Gigabit Server Adapter 14E4.1659: Broadcom NetXtreme Gigabit Ethernet BCM5721 103C.7031: HP NC320T PCIe Gigabit Server Adapter 103C.7032: HP NC320i Integrated Gigabit Server Adapter 14E4.165A: Broadcom NetXtreme Gigabit Ethernet BCM5722 103C.7051: HP NC105i PCIe Gigabit Server Adapter 103C.7052: HP NC105T PCIe Gigabit Server Adapter 14E4.166A: Broadcom NetXtreme Gigabit Ethernet BCM5780 103C.7035: HP NC325i Integrated Dual Port PCIe Gigabit Server Adapter 14E4.166B: Broadcom NetXtreme Gigabit Ethernet BCM5780 103C.7036: HP NC325i Integrated Dual Port PCIe Gigabit Server Adapter
The following NetXtreme cards may be recognized and function properly, but are not officially supported in all configurations. Please contact Broadcom to determine if yours is a supported configuration:
14E4.167E: Broadcom NetXtreme Fast Ethernet BCM5751F 14E4.167F: Broadcom NetXtreme Fast Ethernet BCM5787F 14E4.1646: Broadcom NetXtreme Gigabit Ethernet BCM5702 14E4.16A6: Broadcom NetXtreme Gigabit Ethernet BCM5702 0E11.00BB: HP NC7760 Gigabit Server LOM 14E4.16C6: Broadcom NetXtreme Gigabit Ethernet BCM5702 14E4.1653: Broadcom NetXtreme Gigabit Ethernet BCM5705 0E11.00E3: HP NC7761 Gigabit Server Adapter 14E4.1654: Broadcom NetXtreme Gigabit Ethernet BCM5705 103C.3100: HP NC1020 ProLiant Gigabit Server Adapter 32 PCI 103C.3226: HP NC150T PCI 4-port Gigabit Combo Switch Adapter 14E4.165D: Broadcom NetXtreme Gigabit Ethernet BCM5705M 14E4.165E: Broadcom NetXtreme Gigabit Ethernet BCM5705M 14E4.1658: Broadcom NetXtreme Gigabit Ethernet BCM5720 14E4.1676: Broadcom NetXtreme Gigabit Ethernet BCM5750 14E4.167C: Broadcom NetXtreme Gigabit Ethernet BCM5750M 14E4.1677: Broadcom NetXtreme Gigabit Ethernet BCM5751 14E4.167D: Broadcom NetXtreme Gigabit Ethernet BCM5751M 14E4.1600: Broadcom NetXtreme Gigabit Ethernet BCM5752 14E4.1601: Broadcom NetXtreme Gigabit Ethernet BCM5752M 14E4.16F7: Broadcom NetXtreme Gigabit Ethernet BCM5753 14E4.16FE: Broadcom NetXtreme Gigabit Ethernet BCM5753F 14E4.16FD: Broadcom NetXtreme Gigabit Ethernet BCM5753M 14E4.167B: Broadcom NetXtreme Gigabit Ethernet BCM5755 14E4.1673: Broadcom NetXtreme Gigabit Ethernet BCM5755M 14E4.16DD: Broadcom NetXtreme Gigabit Ethernet BCM5781 14E4.1696: Broadcom NetXtreme Gigabit Ethernet BCM5782 14E4.169A: Broadcom NetXtreme Gigabit Ethernet BCM5786 14E4.169B: Broadcom NetXtreme Gigabit Ethernet BCM5787 14E4.1693: Broadcom NetXtreme Gigabit Ethernet BCM5787M 14E4.169C: Broadcom NetXtreme Gigabit Ethernet BCM5788 14E4.169D: Broadcom NetXtreme Gigabit Ethernet BCM5789
Solution
The 'bcme' driver is available at the following URL:
https://ftp.scoexpert.com/openserver5/507/driversMODIFICATION HISTORY
********************v10.4.3 (April 9, 2007)
==============================Fixes since v8.3.2: ------------------- 1) Problem : (CQ29062) Kernel panics when performing UDP test. 2) Problem : (CQ29012) Poor netperf performance on 5755 and 5722 devices. 3) Problem : 5703S devices are failing to get link intermittently. 4) Problem : (CQ27832) 5755M fails IEEE tests. 5) Problem : Certification tests fail to find the driver's ISR. 6) Problem : (CQ25694) Invalid NVRAM type messages appear on the console. 7) Problem : (CQ25155 and CQ23480) Under rare circumstances, 5721 devices can encounter a read DMA overrun. This would result in subsequent read DMA operations not completing. This in turn would lead to network applications failing or "timing out". 8) Problem : (CQ9987) On a machine with heavy traffic, register reads may return corrupted data. 9) Problem : Devices with fastboot firmware will cause the driver to issue an invalid NVRAM layout warning. 10) Problem : (CQ24525) On rare occasions, 5755 device will fail to acquire link at 1Gbps speeds. 11) Problem : (CQ22582) Link messages flood the console when 5714S and 5715S devices are configured back-to-back. 12) Problem : (CQ14603) Driver reports link down messages when failover device is activated. 13) Problem : (CQ22582) Link messages flood the console when 5714S and 5715S devices are configured back-to-back. 14) Problem : The driver intermittently fails to track and notate the true link status of 5714S and 5715S devices. 15) Problem : (CQ22582) Link messages flood the console when 5714S and 5715S devices are configured back-to-back. 16) Problem : (CQ22582) Link messages flood the console when 5714S and 5715S devices are configured back-to-back. 17) Problem : The driver intermittently fails to track and notate the true link status of 5714S and 5715S devices. 18) Problem : Driver does not load on 5715S devices.
Enhancements since v8.3.2:
--------------------------
1) Change : Added HP branding for NC105i and NC105T.
2) Change : Added support for BCM5722.
3) Change : Added support for BCM5788, BCM5787, and BCM5786.
4) Change : Added support for BCM5755.
5) Change : Added 5714S and 5715S support.-------------------------------------------------------------------------
I. Installation & UpdateTo install these drivers, take the following steps:
- Log in as root.- Download the volume image to your machine to a directory, for example, /tmp/vol.
- Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'.
- Give the directory name where the volume images have been downloaded, for example, /tmp/vol.
- Complete the installation and exit custom.
If this is a fresh install of the driver: - Install the network adapter hardware into your computer.
- Run 'netconfig' and configure the new
adapter.If this is an update of the driver: - Relink the kernel and reboot to activate the new driver.
------------------------------------------------------------------------
II. Software NotesThe compatible bus type for this driver is PCI.
This driver has been tested with and is supported on:
SCO OpenServer Release 5.0.7: osr507mp5 - Maintenance Pack 5 for SCO OpenServer Release 5.0.7
1000 Mbps (1 Gbps) full duplex fixed speed is only valid for fibre
connections. For copper twisted pair connections, 1 Gbps can only be
set through auto negotiation with a 1 Gbps link partner.Auto negotiation of flow control is only valid when the line speed is
set to auto negotiation (all speeds advertised or single speed
advertised).Jumbo Frames and Other Advanced Parameters
==========================================Jumbo MTU sizes and other advanced tunable parameters for the
BCM5700 controller are located in the file space.c in the
directory /etc/conf/pack.d/bcme. A description for each parameter
is contained in space.c. Modify the desired parameter in space.c,
rebuild the kernel, and reboot the system. Note that the MTU sizes
can be individually set for each adapter in the system whereas all
other parameters apply globally to all adapters.Disabling ASF in the firmware
==============================This driver does not support ASF. If you find that the driver
does not load due to ASF being enabled in the firmware, use the
following procedure to disable it:1. Download the "DOS Diagnostic Utilities" from http://broadcom.com/support/ethernet_nic/netxtreme_server.php 2. Create a bootable CD using the b57udiag ISO file 3. Boot to DOS using this CD 4. Choose option one on the FreeDOS 1.0 Final Cut CD menu 5. Choose option "Install to HD using FD setup 6. Run FreeDOS from CD ROM (return to command prompt) 7. cd to b57diag and run "b57udiag -cmd" 8. Run "setasf -d" 9. Reboot the system