Problem
What driver is available for the Broadcom NetXtremeII HARDWARE listed below?
HARDWARE: All of the following cards are supported:
Note1: The format of the below is Vendor.ID.DeviceID: chipset/board name
subVendorID.SubDeviceID: board nameboard_id (VendorID.DeviceID) / subboard_id (subVendorID.subDeviceID) are provided in hexadecimal format.
Note 2: To obtain the board_id, type the following as root: "hw -r bus -v | egrep 'VendorId|DeviceId'" or "hw -r bus -v | egrep 'VendorId|DeviceId|SubsysVendorID|SubsystemDeviceID'" and concatenate the pair of 4 digit hex numbers of each (ie. If the VendorId is 0x1234 and the DeviceId is 0x5678, then the board_id to look for below, would be '1234.5678').
14E4.164A: Broadcom NetXtreme II Gigabit Ethernet BCM5706C 103C.1709: HP NC371i Multifunction Gigabit Server Adapter 103C.3070: HP NC380T PCIe DualPort Multifunction Gigabit Server Adapter 103C.3101: HP NC370T Multifunction Gigabit Server Adapter 103C.3106: HP NC370i Multifunction Gigabit Server Adapter
14E4.16AA: Broadcom NetXtreme II Gigabit Ethernet BCM5706S 103C.3102: HP NC370F Multifunction Gigabit Server Adapter 103C.310C: HP NC370i Multifunction Gigabit Server Adapter
14E4.164C: Broadcom NetXtreme II Gigabit Ethernet BCM5708C 103C.7037: HP NC373T PCIe Multifunction Gigabit Server Adapter 103C.7038: HP NC373i Integrated Multifunction Gigabit Server Adapter 103C.7045: HP NC374m PCIe Multifunction Gigabit Server Adapter
14E4.16AC: Broadcom NetXtreme II Gigabit Ethernet BCM5708S 103C.1706: HP NC373m Multifunction Gigabit Server Adapter 103C.703B: HP NC373i Integrated Multifunction Gigabit Server Adapter 103C.703D: HP NC373F PCIe Multifunction Gigabit Server Adapter
14E4.1639: Broadcom NetXtreme II Gigabit Ethernet BCM5709C 103C.7055: HP NC382i DualPort Multifunction Gigabit Server Adapter 103C.7059: HP NC382T PCIe DualPort Multifunction Gigabit Server Adapter
14E4.163A: Broadcom NetXtreme II Gigabit Ethernet BCM5709S 103C.171D: HP NC382m DualPort 1GbE Multifunction BL-c Adapter 103C.7056: HP NC382i DualPort Multifunction Gigabit Server Adapter
14E4.163B: Broadcom NetXtreme II Gigabit Ethernet BCM5716C14E4.163C: Broadcom NetXtreme II Gigabit Ethernet BCM5716S Solution
The 'bnxii' driver is available at the following URL:
https://ftp.scoexpert.com/openserver5/507/driversMODIFICATION HISTORY
********************v4.6.0 (December 3, 2008)
===========================Initial release.-------------------------------------------------------------------------
I. Installation & UpdateTo install these drivers, take the following steps:
- Log in as root.- Download the volume image to your machine to a directory, for example, /tmp/vol.
- Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'.
- Give the directory name where the volume images have been downloaded, for example, /tmp/vol.
- Complete the installation and exit custom.
If this is a fresh install of the driver: - Install the network adapter hardware into your computer.
- Run 'netconfig' and configure the new
adapter.If this is an update of the driver: - Relink the kernel and reboot to activate the new driver.
------------------------------------------------------------------------
II. Software NotesThe compatible bus type for this driver is PCI.
This driver has been tested with and is supported on:
SCO OpenServer Release 5.0.7: osr507mp5 - Maintenance Pack 5 for SCO OpenServer Release 5.0.7