Problem
What driver is available for the Intel PRO/1000 and HARDWARE listed below?
HARDWARE: All of the following cards are supported:
Intel PRO/1000 F Server Adapter (SX Fiber) PWLA8490SX
Intel PRO/1000 GT Desktop Adapter PWLA8391GT
Intel PRO/1000 MF Dual Port Server Adapter (SX Fiber) PWLA8492MF
Intel PRO/1000 MF Server Adapter (LX) PWLA8490LX
Intel PRO/1000 MF Server Adapter (SX) PWLA8490MF
Intel PRO/1000 MT Desktop RJ45 PWLA8390MT
Intel PRO/1000 MT Dual Port Server Adapter PWLA8492MT
Intel PRO/1000 MT Low Profile Desktop PWLA8390MTBK20
Intel PRO/1000 MT QUADport Server Adapter PWLA8494MT
Intel PRO/1000 MT Server Adapter PWLA8490MT
Intel PRO/1000 PF Dual Port Server Adapter EXPI9402PF
Intel PRO/1000 PF Server Adapter EXPI9400PF
Intel PRO/1000 PT Desktop Adapter EXPI9300PT
Intel PRO/1000 PT Dual Port Server Adapter EXPI9402PT
Intel PRO/1000 PT Server Adapter EXPI9400PT
Intel PRO/1000 Server Adapter (SX Fiber) PWLA8490
Intel PRO/1000 T Server Adapter PWLA8490T
Intel PRO/1000 XF Server Adapter (SX Fiber) PWLA8490XF
Intel PRO/1000 XT Lo Profile PWLA8490XTL
Intel PRO/1000 XT Server Adapter PWLA8490XT
HP NC6170 Dual PCI-X 1000-SX Server Adapter
HP NC7170 Dual PCI-X 1000-T Server Adapter
HP ProLiant NC 310F PCI-X Gigabit Server Adapter Solution
The 'eeG' driver is available at the following URL:
https://ftp.scoexpert.com/openserver5/507/driversMODIFICATION HISTORY
********************v2.3.10 (March 17, 2006)
============================= Fixes:
-------------
After version 2.1.12 through 2.3.10:1) Problem : Removed setting of the PASS_FALSE_CARRIER bit in the ESB2 interface control register.
For version 2.1.12 and prior:None. Enhancements:
-------------
After version 2.1.12 through 2.3.10:1) Change : Added Support for additional 82572 devices.
2) Change : Added support for latest version of the PRO/1000 GT
Quad Port Server Adapter, product 82546GB.
3) Change : Added updated IML function(s).
4) Change : Added Support for ESB2 LAN devices.For version 2.1.12 and prior:1) Change : Added Support for new device ID for existing device
(10B9).
2) Change : Added strong branding entry in eeG_T file.
3) Change : Update to prevent PCIe 1.0 vs. 1.0a incompatibility.
4) Change : Added custom mac address flag set during configuration
of custom mac address and added write to rar in watchdog
if correct mac_type and custom mac address is set.
5) Change : Added explicit set of MULR in eeG_init_test_bits function
to try and improve performance.
6) Change : Add device id to driver for new device support.
7) Change : Added device id and branding strings.
8) Change : Added function to set test bits per device.
9) Change : Added and removed appropriate device ids.
10) Change : Added device support 2 LF HW.
11) Change : Added device id's for new adapter support.
12) Change : Added LF HW device.
13) Change : Added additional Device id's.
14) Change : Updated branding strings to support more than one
device id.-------------------------------------------------------------------------
I. InstallationTo install these drivers, take the following steps:
- Log in as root.- Download the volume image to your machine to a directory, for example, /tmp/vol.
- Run 'custom' and select 'Install New'. Install from your host machine using 'Media Images'.
- Give the directory name where the volume images have been downloaded, for example, /tmp/vol.
- Complete the installation and exit custom.
- Install the network adapter hardware into your computer.
- Run 'netconfig' and configure the new
adapter.------------------------------------------------------------------------
II. Software NotesThe compatible bus type for this driver is PCI.
This driver has been tested with and is supported on:
SCO OpenServer Release 5.0.7 with Maintenance Pack 4This driver supports 82544, 82540, 82545, 82546, 82541, and 82547 MAC
based devices. Legacy adapters based on the 82542 and 82543 MAC
controllers are NOT supported by this driver. If any of these legacy
devices, or any other devices are recognized by this driver, it is
advised NOT to configure them.