Technical article 127586

Graphical Desktop resolution is reduced when importing OpenServer 5.0.7V onto VMware ESX 4.1.x and 4.0.x

OpenServer 5.0.7

Written · Last revised

Problem

I have imported an SCO OpenServer 5.0.7V Virtual Appliance onto my VMware ESX 4.1.x or 4.0.x server.

When I boot the system the graphical login resolution is restricted to either 800x600 or 640x480.

I also see an error message similar to:

Message from <ESX host>: The size of video RAM is currently limited
at 1572864 bytes, which is insufficient for the configured maximum
resolution of 2360x1770 at 16 bits per pixel.  The maximum
resolution is therefore being limited to 724x543 at 16 bits per pixel.
in the VMware event log.

Solution

This problem can be seen in circumstances where your Virtual Server is heavily loaded and resources are limited.

As per the VMware Knowledgebase article at:

http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1024990

Vmware recommend that you accept the current maximum settings.

From the Xinuos technical article database, record 127586. Reproduced with permission. The original is at www.sco.com/ta/127586, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.