Technical article 127409

How can I connect to a Floppy media after importing the SCO OpenServer 5.0.7V virtual appliance on to a VMware ESX/ESXi 3.5 server?

OpenServer 5.0.7

Written · Last revised

Problem

How can I connect to a Floppy media after importing the SCO OpenServer 5.0.7V virtual appliance on to a VMware ESX/ESXi 3.5 server?

Solution

SCO OpenServer 5.0.7V kernel comes preconfigured with the following Floppy device:

1.44 Floppy drive - /dev/fd0

There are four different scenarios where you can connect to a Floppy drive depending on your ESX/ESXi server hardware.

This TA will go through each scenario and the way to configure the Floppy drive under VMware ESX/ESXi 3.5 so that SCO OSR507V can connect to it.

Please Note:

Before you start, it is highly recommended to add a Power-on Boot Delay of 10 seconds to the OSR507V VM.

This is important, as it will give us time to press ESC or F2. To do that, edit the OSR507VM VM settings. Under "Option" tab --> Boot Options, add 10000 millsec

1- The ESX 3.5 Server has a physical attached Floppy drive and you want to connect to it from OSR507V

Note: This is not true in case of ESXi 3.5, as
      VMware ESXi does not support Guest OS VM access
      to its local attached Floppy drive.

- Edit the OSR507V VM Settings - Mark the "Floppy Drive 1" - Under "Device Type", choose "Host Device - /dev/fd0" Check "Connect at Power on" at the "Device Status"

- Then click "OK" to save the settings.

- Power on OSR507V VM and you will now have access to the physical Floppy drives via /dev/fd0

2- Your ESX/ESXi 3.5 does not have an physical attached Floppy drives.

2.1 - You want to connect to a Floppy image that resides on ESX/ESXi 3.5 server

- Edit the OSR507V VM Settings - Mark the "Floppy Drive 1" Under "Device Type", choose "use existing floppy image in datastore". Then click on the "Browse" button.

A "Browse Datastores" pop up windows will appear.

Browse under vmimages --> Floppies (Or wherever that floppy image "flp extension" resides).

And choose the Floppy image that you want to access.

The floppy image has to be in "flp" extension.

Check "Connect at Power on" at the "Device Status"

- Then click "OK" to save the settings.

Power on the OSR507V VM and you can now connect to the Floppy image via /dev/fd0.

2.2 - You want to connect to the physical Floppy drive that is
      attached to your windows desktop which is running the VMware
      VI/VC client.
- Edit the OSR507V VM Settings

- Mark the "Floppy Drive 1" Under "Device Type", choose "Client Device"

- Then click "OK" to save the settings.

- Power the OSr507V VM and at the OSR507V VM POST BIOS messages, press the ESC button in order to get the "Boot Menu".

- On the top of the OSR507V Virtual Console, you will see a "Connect Floppy 1" button. Choose "Connect from A: "

- Then from the "Boot Menu", boot from the Hard Drive.

You can now connect to your Desktop Floppy drive via /dev/fd0.

2.3 - You want to connect to a Floppy image that
      resides on your windows desktop which is
      running the VMware VI/VC client.
- Edit the OSR507V VM Settings

- Mark the "Floppy Drive 1" Under "Device Type", choose "Client Device"

- Then click "OK" to save the settings.

- Power the OSr507V VM and at the OSR507V VM POST BIOS messages, press the ESC button in order to get the "Boot Menu".

- On the top of the OSR507V Virtual Console, you will see "Connect Floppy 1" button.

For Floppy, choose "connect to floppy image"

Then browse to the location on your client desktop where the floppy image "flp - extension" file resides.

- Then from the "Boot Menu", boot from the Hard drive.

You can now connect to the Floppy flp image on your Desktop via /dev/fd0.

From the Xinuos technical article database, record 127409. Reproduced with permission. The original is at www.sco.com/ta/127409, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.