Technical article 127408

How can I connect to CD/DVD-ROM media after importing the SCO OpenServer 5.0.7V appliance on to a VMware ESX/ESXi 3.5 server?

OpenServer 5.0.7

Written · Last revised

Problem

How can I connect to CD/DVD-ROM media after importing the SCO OpenServer 5.0.7V appliance on to a VMware ESX/ESXi 3.5 server?

Solution

SCO OpenServer 5.0.7V kernel comes preconfigured with the following CD/DVD-ROM device:

IDE ATAPI CD-DVD-ROM (PRIMARY / MASTER) - /dev/cd0.

There are four different scenarios where you can connect to a CD/DVD- ROM drive depending on your ESX/ESXi server hardware.

This TA will go through each scenario and the way to configure the CD/DVD-ROM drive under VMware ESX/ESXi 3.5 so that SCO OSR507V can connect to it.

Please Note:

Before you start, it is highly recommended to add a Power-on Boot Delay of 10 seconds to the OSR507V VM.

This is important, as it will give us time to press ESC or F2.

To do that, edit the OSR507VM VM settings.

Under "Option" tab --> Boot Options, add 10000 millsec

1- The ESX 3.5 Server has a physical attached CD/DVD-ROM drive and you want to connect to it from OSR507V

Note: This is not true in case of ESXi 3.5, as
      VMware ESXi does not support Guest OS VM access
      to its local attached CD/DVD-ROM drive.

- Edit the OSR507V VM Settings - Mark the "CD/DVD Drive 1" - Under "Device Type", choose "Host Device - /dev/hda"

Note: /dev/hda could be different depending on the ESX 3.5 server hardware

Check "Connect at Power on" at the "Device Status" Make sure that the "Virtual Device Node" should have "IDE (0:0) CD/DVD Drive 1"

- Then click "OK" to save the settings.

- Power on OSR507V VM and you will now have access to the physical CD/DVD-ROM drives via /dev/cd0

2- Your ESX/ESXi 3.5 does not have an physical attached CD/DVD-ROM drives.

2.1 - You want to connect to a CD/DVD-ROM ISO image that resides on ESX/ESXi 3.5 server

- Edit the OSR507V VM Settings
- Mark the "CD/DVD Drive 1"

Under "Device Type", choose "Datastore ISO file".

Then click on the "Browse" button.

A "Browse Datastores" pop up windows will appear. Browse under vmimages --> tools-isoimages (Or wherever iso image resides).

Check "Connect at Power on" at the "Device Status"

Make sure that the "Virtual Device Node" should have "IDE (0:0) CD/DVD Drive 1"

- Then click "OK" to save the settings.

Power on the OSR507V VM and you will now have CD/DVD-ROM image access via /dev/cd0.

2.2 - You want to connect to the physical CD/DVD-ROM drive that is attached to your windows desktop which is running the VMware VI/VC client.

- Edit the OSR507V VM Settings
- Mark the "CD/DVD Drive 1"
Under "Device Type", choose "Client Device"

Make sure that the "Mode" is "Emulate IDE" and the "Virtual Device Node" should have "IDE (0:0) CD/DVD Drive 1"

- Then click "OK" to save the settings.

- Power the OSr507V VM and at the OSR507V VM POST BIOS messages, press the ESC button in order to get the "Boot Menu".

- On the top of the OSR507V Virtual Console, you will see a "Connect CD/DVD 1" button.

Choose "Connect from E:"
(From your VI client local CD/DVD-ROM drive
letter)

- Then from the "Boot Menu", boot from the Hard Drive.

You can now connect to your Desktop CD/DVD-ROM via /dev/cd0.

2.3 - You want to connect to a CD/DVD-ROM ISO image
      that resides on your windows desktop which is
      running the VMware VI/VC client.
- Edit the OSR507V VM Settings
- Mark the "CD/DVD Drive 1"
Under "Device Type", choose "Client Device"

Make sure that the "Mode" is "Emulate IDE" and the "Virtual Device Node" should have "IDE (0:0) CD/DVD Drive 1"

- Then click "OK" to save the settings.

- Power the OSr507V VM and at the OSR507V VM POST BIOS messages, press the ESC button in order to get the "Boot Menu".

- On the top of the OSR507V Virtual Console, you will see "Connect CD/DVD 1" button. For CD/DVD driver, choose "Connect ISO image"

Then browse to the location on your client desktop where the CD-ROM image ISO image file resides.

- Then from the "Boot Menu", boot from the Hard drive.

You will can now connect to the CD/DVD-ROM iso image on your Desktop via /dev/cd0.

From the Xinuos technical article database, record 127408. Reproduced with permission. The original is at www.sco.com/ta/127408, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.