Technical article 105660

How do I initially set up the SCO Internet to Netware Gateway and client?

OpenServer 5.0.0OpenServer 5.0.2

Written · Last revised

Problem

How do I set up the SCO Internet to Netware Gateway and make a
client connection to it?  Where do I start?

Solution

The overall steps below are needed to initially load and connect the SCO Internet to Netware Gateway and client products.

1. The SCO IPX/SPX network protocol must first be configured to run on top of the gateway server LAN card via netconfig(ADM).

An Internal Network number and (External) Network Number must be assigned. The (External) Network Number should be set to that used by the local network Netware Server, or if none pre-exists, to its own unique value.

As an example:
..
Maximum Number of NVT Logins :  16
Internal Network Number :       100
Network Number :                B0B0B0B1
Frame Type :                    802.3

2. The SCO Internet Gateway product is then installed. This is provided as part of the following product CD-ROM contents:

SCO Server Enhancement Products SCO Internet Family, Release 1.0, 1.1.

The SCO Internet Gateway is loaded using the SCO Software Manager and must be then licensed via the License Manager. It requires an initial base 5-user license. Additional client connection licenses may be installed at a later stage.

NOTE: In order to install additional client connection licenses through the scoadmin(adm) License Manager, the SCO Internet Supplement must be installed on the system. This supplement is available as "rs40b" via anonymous ftp from the SCO ftp site at:

https://ftp.scoexpert.com/Supplements/internet/rs40b/

NOTE: The Internet to Netware Gateway will not show up as part of the IPX/SPX chain in netconfig(ADM) as in other SCO layered products.

After loading and rebooting, both the IPX/SPX daemons and the Gateway daemon, "/usr/bin/inetixd" should be running. Check this using the "ps -ef" command.

Check the status of the gateway using the OpenServer-based "/usr/bin/mcsadm" administration utility.

For example:
==============================================
                 Inetix Gateway
                 Display Status
==============================================
Status:  RUNNING
Gateway Access: No Restrictions
IP Filter: No Restrictions
Network Address: 00000100
Node Address: 000000000001
Current Connections: 0
Current Users: 0
Number of Users Licensed: 5

The password for the gateway must also be set. This can be set by running the "inetix passwd" command from the command line prompt as the "root" user, or by using "mcsadm" utility. Within the latter, select "Administer MCS Software", "Inetix Gateway", and "Set Password".

The SCO Internet to NetWare Gateway may also be administered from a PC based IGA.EXE (Internet Gateway Administration) utility. Both this, and client software to allow a Microsoft Windows 95 or Windows 3.11 PC to connect to the SCO gateway, are supplied as part of the SCO CD-ROM distribution media.

3. IPX/SPX must be installed on the PC clients to provide a network protocol for the Inetix Client software. This is provided on the Microsoft Windows 95 CD-ROM media or Novell's IPX stack may be used.

NOTE: For Microsoft Windows version 3.1X, Novell's version of IPX/SPX and their Novell Client for Windows product must be used. Inetix client does not support the Microsoft IPX/SPX stack for this version.

4. The Inetix client software is then installed on the PC clients.

Installation diskettes for Client software may be made from the SCO distribution CD-ROM media as follows:

- Format several diskettes in MS-DOS format

- Mount the CD-ROM media onto a UNIX filesystem:

# mount /dev/cd0 /mnt
# cd /mnt/images/mcs

- Copy the disk images to the diskettes:

# dd if=win95.dd of=/dev/install bs=18k

The Inetix client image contains its own FTP utility and can be used to transfer the "iga.exe" file to the PC.

The SCO Internet to NetWare Gateway or Inetix Client sofware is installed on a Windows 95 PC client as follows:

- Insert the client diskette into the diskette drive.

- Enter "Control Panel" and "Networks" and add a protocol.

NOTE: Inetix client is added as a network protocol, not a software package.

Have the Windows 95 installation CD-ROM present, as an update of the Windows 95 system files is necessary.

- Reboot the PC.

5. Configure the Inetix protocol. It will be listed as present but unconfigured. Add the gateway details. For example, following the settings above:

Gateway:                scogate
Network Address:        00000100
Node Address:           000000000001
That is:

SCO IPX/SPX Internal network address <==> Network Address SCO IPX/SPX External network address <==> Node Address

Click on the check button to test the connection to the gateway.

6. The IGA utility may now be installed as a program via the Control Panel. It is used to configure the gateway remotely, defining what access NetWare clients on the LAN have to the gateway and beyond. It requires a password as set previously on the server via "mcsadm". It also requires a daemon to be started on the gateway. As the "root" user:

# inetixra stop
# inetixra start
This should show as:
# ps -ef |grep inetixra
root 3440    1  0  Jun-05  ?  00:00:01 /usr/bin/inetixra start

Netscape Navigator or other browsers on the PC should now be able to use the gateway to access the Internet/Intranet.

See also

TA105578, "SCO Internet to Netware Gateway fails to start with "Error opening IPX device".

TA101295, "How do I configure the SCO Gateway for NetWare so I can see my NetWare servers?".

SCO Internet FastStart, Chapter 2, "Setting up SCO Internet to NetWare Gateway".

http://www.mcsdallas.com

From the Xinuos technical article database, record 105660. Reproduced with permission. The original is at www.sco.com/ta/105660, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.