Technical article 110687

How do I install an SCO OpenServer supplement I received on a CD-ROM?

OpenServer 5.0.0OpenServer 5.0.2OpenServer 5.0.4OpenServer 5.0.5

Written · Last revised

Problem

I have received an SCO Supplement on CD-ROM media, but the only installation instructions I have are for images downloaded from SCO's website. How do I install an SCO supplement from CD-ROM?

Solution

Follow the simple procedure below to install the patch of your choice.

NOTE:     This procedure only applies if the machine you are using to
          access the patch files on the CD-ROM and the machine you wish to
          apply the patch to are one and the same machine.  If this is not
          the case, then the following technical article may be of additional
          benefit:

ta110712, "What should I do if I am having problems downloading or installing a patch?"

This article contains references to specific articles covering download and file transfer techniques which are used to prepare the patch for installation on the target system.

---------------------------------------------------------------------

PROCEDURE FOR INSTALLING AN OPENSERVER PATCH FROM A MOUNTABLE CD-ROM

---------------------------------------------------------------------

1. Log in as root and list the contents of the root directory with the command:

lf

If you do not see the listing "/mnt", then create it with the command:

mkdir /mnt

2. Place the CD-ROM in your primary CD-ROM drive and mount the CD-ROM with the following command:

mount -r /dev/cd0 /mnt
3. Locate the directory containing your patch.  For example,
on the Y2K Resource CD, all supplements are located in the
subdirectory "patches" beneath the mount point /mnt.  In this
case, execute the commands:
cd /mnt/patches
lf

So, if you are trying to find OSS601A, you'll notice a subdirectory "oss601a" and the full pathname would be:

/mnt/patches/oss601a
4. Invoke the SCO Software Manager with the command "scoadmin
software" or "custom".  At this point:

4a. For SCO OpenServer 5.0.0 and 5.0.2 systems, pull down the Software menu and select Patch Management -> Apply Patch. You will see the Begin Apply Patch menu. Be sure the local machine name is selected and choose Continue.

- OR -

4b. For SCO OpenServer 5.0.4 and 5.0.5 systems, pull down the Software menu and select Install New. Be sure the local machine name is selected and choose Continue.

5. In the Select Media window, pull down the Media Device menu.
Select Media Images and then Continue. When prompted to Enter
Image Directory, type the full pathname that you located in
step 3 above.  For OSS601A on the Y2K Resource CD, for instance,
this pathname would be:
/mnt/patches/oss601a

6. Once the installation finishes, select Exit from the Host menu. Installation of the supplement is now complete.

7. To take the CD-ROM out, unmount it with the commands:

cd /
umount /mnt

8. Check the cover letter that accompanied the supplement in the CD-ROM case for any further instructions, including whether or not a system reboot is necessary for the supplement to take effect.

NOTE:     If you are using the SCO Y2K Resource CD, there is also a
          graphical screen with links to supplements and installation
          instructions on your CD-ROM. You can use this interface as an
          alternative to the above instructions, if you are more comfortable
          using your browser to access and upload file images.

To use this, log in and mount your CD-ROM as above (steps 1 and 2). Then start up a web browser and open this location:

file:/mnt/index.html
Find the hyperlink for accessing the supplements page and follow
the instructions for uploading (copying) your supplement from
the CD-ROM to a known directory, such as /tmp.  Then continue
with steps 4-8 above to complete the installation.  Note that the
pathname, as illustrated in steps 3 and 5 above, would correspond
to wherever you chose to copy the patch files to.

See also

ta110563, "How do I install an SCO OpenServer SLS I received on floppy disks?"

ta110712, "What should I do if I am having problems downloading or installing a patch?"

ta110713, "What Year 2000 Supplements are included on SCO Support Library (SSL) version 1.2.4 and how to I install them?

ta110658, "Installation of OSS601A from the SCO Year 2000 Resource CD fails with 'Unable to initialize device' error."

ta110542, "How can I check if OSS601A is installed on my SCO OpenServer 5.0.2 system?"

ta110090, "Special notes and recommendations before installing OSS600A, the Year 2000 Supplement for SCO OpenServer 5.0.5."

ta110091, "Special notes and recommendations before installing
OSS601A, the Year 2000 Supplement for SCO OpenServer 5.0.2 and
5.0.4."

From the Xinuos technical article database, record 110687. Reproduced with permission. The original is at www.sco.com/ta/110687, which is reachable but blocked from search engines. Xinuos marks this article against a retired product line. That refers to the product’s lifecycle, not to whether the advice still works — plenty of it still applies to running systems.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.