Technical article 126449

How to get the Skunkware version of Ghostscript to work on SCO OpenServer 5.0.6 and 5.0.7?

OpenServer 5.0.6OpenServer 5.0.7

Written · Last revised

Problem

I downloaded the Skunkware OpenServer 5 version of Ghostscript from:

http://ftp2.sco.com/pub/skunkware/osr5/vols/ghostscript-6.51-VOLS.tar

It installed successfully on OpenServer 5.0.6. But, when I try to run "pdftops" I get the error:

"dynamic linker: /usr/local/lib/libpng.so.2"

Where can the shared library libpng.so.2 be found in order for the Ghostscript to function correctly?

Solution

The libpng.so.2 shared library is available in Graphic Libraries Glib.

You can get the Graphic Libraries for OpenServer 5.0.6 / 5.0.7 from the two options below:

1- Skunkware version:

Download the latest Skunkware Graphic Libraries Glib version 1.5 (Glib-1.5-VOLS.tar) available at:

ftp://ftp2.sco.com/pub/skunkware/osr5/vols/Glib-1.5-VOLS.tar

2- SCO OpenServer 5.0.6/5.0.7 Supplemental Graphics, Web and X11 Libraries (gwxlibs):

Download the latest OpenServer 5.0.6/5.0.7 Supplemental Graphics, Web and X11 Libraries (gwxlibs) version 2.0.0Eb. Available at:

https://ftp.scoexpert.com/openserver5/507/other/gwxlibs200Eb/gwxlibs200Eb_vol.tar
https://ftp.scoexpert.com/openserver5/507/other/gwxlibs200Eb/gwxlibs-2.0.0Eb.txt

NOTE: the gwxlibs200Eb_vol.tar is 95 MB big.

Therefore, if Glib - libpng.so.2 is the only thing you are looking for in order to just run Ghostscript then option 1 should be the ideal option.

From the Xinuos technical article database, record 126449. Reproduced with permission. The original is at www.sco.com/ta/126449, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.