Technical article 127670

How to redirect console output during ISL

OpenServer 5.0.7

Written · Last revised

Problem

I need to redirect the output from ISL to a serial console.

Solution

Following a description for OpenServer 5.0.7.

Install "putty" on a Windows system and set session=serial Serial line=COM1 Speed=9600

Then click on Serial and set Serial line to connect to=COM1 Speed=9600 Data bits=8 Stop bits=1 Parity=None Flow control=None

Use a standard serial cable and connect COM1 on your server with COM1 on your Windows system. Make sure COM1 is enabled in the BIOS on both systems (defaults are I/O=3F8 and IRQ=4).

Boot from the OpenServer 5.0.7 boot CD and at the boot promt type

: defbootstr systty=sio <ENTER>

The installation will start as normal but when switching to the "hwconfig"-like screen you will get the output on the "putty" window. You will be asked Enter terminal type code

Enter "ansi". You are now ready to install the system.

From the Xinuos technical article database, record 127670. Reproduced with permission. The original is at www.sco.com/ta/127670, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.