Technical article 126653

I cannot install SCO OpenServer 5.0.7 on a Fujitsu Siemens PRIMERGY TX150-S5 that has no standard legacy floppy drive attached to it by default, using a BTLD on a floppy disk via USB floppy drive.

OpenServer 5.0.7

Written · Last revised

Problem

I have a Fujitsu Siemens PRIMERGY TX150-S5 Server that has no standard legacy floppy drive attached to it. Fujitsu Siemens now ship their PRIMERGY TX150-S5 with no legacy floppy drive installed as default.

I am using the Server with the boot controller to be the onboard LSI 1068 SAS and SAS HD's.

In order for me to install OpenServer 5.0.7 on this server, I need to load the latest BTLD "lsil" driver version 1.04.09 via a USB floppy drive.

NOTE: The latest SCO OpenServer5 "lsil" BTLD is available at LSI website

http://www.lsi.com/files/support/ssp/fusionmpt/SCO/SCO_op5_mpt_lsil_10409.zip

or on the SCO Supplement 5 BTLD ISO Image (osr507)

http://www.sco.com/support/update/download/release.php?rid=192

When installing SCO OpenServer 5.0.7 with an additional BTLD "lsil", the ISL boot loader will need to load the "lsil" driver at the initial load of the Install Kernel with the command:

boot
: defbootstr link="lsil"
Loading floppy image into memory...
Loading kernel fd(64)unix  .text
Loading kernel fd(64)unix  .data
Loading Kernel fd(64)unix  .bss

Loading Kernel symbol table, this may take a few minutes

Please insert the fd(65)lsil volume and press <Return> or 'q' to quit:

I have my USB Floppy drive attached and then I inserted the "lsil" BTLD floppy disk in it and then hit <Return>.

The ISL boot loader fails to read the USB floppy with this error message:

"Sorry, that volume does not contain the lsil package"

In other words, the ISL boot loader can't see the USB floppy drive, hence access to it fails.

I have also tried several "defbootstr" combinations in order for the ISL boot loader to recognize the USB Floppy drive, but without success and continued to get the same error message as above.

These are the "defbootstr" combinations used with no success:

defbootstr Sflp=usb_msto(0,0,0) link="lsil"
defbootstr Sflp=usb_msto(0,0,0) btld=fd(65) link="lsil"

How can I make the Boot loader see the USB floppy drive and access it?

HARDWARE: Fujitsu Siemens PRIMERGY TX150-S5

Cause

When you purchase the new PRIMERGY TX150-S5 servers, you have the option to have a standard legacy Floppy Driver 1.44 MB installed, or have one without.

Fujitsu Siemens by default ship the PRIMERGY TX150-S5 without a legacy Floppy 1.44 MB Drive. Only a USB Floppy is possible to connect to it.

Therefore, it is recommended to purchase the TX150-S5 with an installed legacy Floppy Drive 1.44 MB. You will not have the problem described in this Technical Article

But if you have purchased the TX150-S5 without a legacy floppy drive installed, it has been found that if you connect a USB Floppy drive with no floppy disk in it "empty" and boot the server, the BIOS will not add the attached USB floppy into its potential attached boot devices, hence you will see no reference to any USB attached floppy device in the POST BIOS message, like this one:

Intel(R) Pentium(R) D CPU 3.40 GHz 2096128K Extended RAM Passed ATAPI CD-ROM: HL-DT-ST DVDRAM GSA-H10W Mouse initialized

As you can see, there is no reference to any found USB Floppy devices. When the OSr507 ISL bootloader requests access to a Floppy drive via "fd(65)" from the BIOS, the BIOS reports that there is no floppy drive attached and load of the BTLD via floppy drive will fail.

But if you boot the server with a USB floppy drive attached to it that has 1.44 MB floppy disk inserted in it, the BIOS will detect the USB floppy drive as a potential boot device:

Intel(R) Pentium(R) D CPU 3.40 GHz
2096128K Extended RAM Passed
ATAPI CD-ROM: HL-DT-ST DVDRAM GSA-H10W
USB 1.1: NEC USB UF000x  <--- Our USB Floppy Device
Mouse initialized

This is how the TX150-S5 BIOS works, even with the latest BIOS upgrade. This has been reported to Fujitsu Siemens for clarification.

Solution

you only need to carry out this if you have no installed legacy floppy 1.44 MB drive.

1- Boot the server and enter the system BIOS setting by hitting the "F2" Key.

In the "Main --> Boot Options --> Boot sequence -->" screen, make sure your Boot Sequence is in the following order:

CD-ROM Drive
Diskette
Hard Drive
Legacy LAN Card
Save the BIOS changes and exit.

2- Plug-in the USB Floppy drive with the "lsil" BTLD floppy disk in it and also place the OSR507 Installation CD in the CD-ROM drive.

Boot the server, at the point in the BIOS POST message display, you should hear the USB floppy being accessed with the BIOS and the LED will flash on for a short time. At this moment, the USB Floppy Drive gets recognized by the BIOS and displayed in the POST BIOS messages as listed above in the "CAUSE" section.

3- When the SCO OpenServer 5.0.7 install media gets read, type the following boot string:

boot
: defbootstr Sflp=usb_msto(0,0,0) link="lsil"

The ISL boot loader will now successfully access the USB floppy drive and load the BTLD "lsil" driver from the floppy diskette.

The remaining installation is straight forward.

NOTES: IMPORTANT - Ensure you are using the July 2005 cut of OSR507 CD Media which has the appropriate USB additions. The "Base Operating system Installation CD" from July 2005 should have the labeled "7OSR01A05073 July05" on it.

See also

TA125420 "I am unable to load a Boot time Loadable driver (BTLD) from a USB floppy drive during ISL (Installation of OSR507).

From the Xinuos technical article database, record 126653. Reproduced with permission. The original is at www.sco.com/ta/126653, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.