Technical article 127496

I have set up a system with 3x146GB disks as RAID5. When running divvy only 18GB get recognized.

OpenServer 5.0.7

Written · Last revised

Problem

I have set up a system with 3x146GB disks as RAID5.

When running 'divvy' only 18GB gets recognized.

Solution

The HP smart array 6i controller bios has a setting that defines the maximum boot partition.

By default this is set to 4GB.

Boot your system and press F8 to enter the controller BIOS.

On the first screen select "create logical volume".

At the bottom of the page change Maximum Boot Partition from 4GB to 8GB.

divvy should now display the full RAID5 capacity.

From the Xinuos technical article database, record 127496. Reproduced with permission. The original is at www.sco.com/ta/127496, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.