Technical article 125867

Installation of SCOoffice Server 4.1 fails

OpenServer 5.0.7

Written · Last revised

Problem

During the installation of SCOoffice Server 4.1 I get an error stating that I should look into

/opt/insight/var/install.log for details.

The installation continues. If I try to run the startup script "/etc/init.d/insightserver start" it says:

Please run /opt/insight/etc/insightserver-setup.sh
This script does not exist.

Cause

Most probably the network is not set up properly.

Solution

Verify that your network card is installed (netconfig).

If not:

1. Remove SCOoffice Server 4.1 using "custom".

2. Add your network card using "netconfig".

3. Ensure DNS is set up correctly.

4. Reboot your server.

5. Test the networking and DNS you have configured.

6. Install SCOoffice Server 4.1 again using "custom"

From the Xinuos technical article database, record 125867. Reproduced with permission. The original is at www.sco.com/ta/125867, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.