Technical article 127211

My OpenServer 5.0.7 system hangs on shutdown after displaying "Automatic Boot Procedure".

OpenServer 5.0.7

Written · Last revised

Problem

I am trying to reboot my system with "init 6", "shutdown -i6", or with the shutdown manager and am seeing it stop after

Automatic Boot Procedure

In some cases, the system will halt just before the message above. In those cases the last message is

System is Down

Solution

First of all, if the server has more than one CPU, then it is first recommended to install the SMP Software and the latest Maintenance Pack and subsquent critical Maintenance from:

http://www.sco.com/support/downloads.html

If after installation, the problem persists then:

Some hardware needs a different method of resetting. There is a tunable in /etc/conf/pack.d/kernel/space.c that implements a different way of rebooting the system:

int softreset_type = 0;  /* Type of system reset used for reboot */
                         /* 0: CMOS RAM Shutdown Status = 5 (default) */
                         /* 1: CMOS RAM Shutdown Status = 0      */
Change this variable to 1 and then run
/etc/conf/cf.d/link_unix -y
init 0
The subsequent reboot attempt with this new kernel should
reboot the system without incident.

Alternatively, consider installing the latest firmware on the server in question.

From the Xinuos technical article database, record 127211. Reproduced with permission. The original is at www.sco.com/ta/127211, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.