Problem
I followed TA126653: "I cannot install SCO OpenServer 5.0.7 on a
Fujitsu Siemens PRIMERGY TX150-S5 that has no standard legacy
floppy drive attached to it by default, using a BTLD on
a floppy disk via USB floppy drive."But I do not have the recommended July 2005 cut of OSR507 CD Media "Base Operating system Installation CD" with label "7OSR01A05073 July05" on it.
Instead, I used the first SCO FCS cut of the SCO OpenServer 5.0.7 "Base Operating system Installation CD" from 2003 which has the label "7OSR01A05072" on it.
I followed the TA126653, accordingly, the "lsil" BTLD was successfully loaded and displayed in the ISL hardware config list. But the installation panics after the usb_ehci controller gets initialized and enters into scodb (OpenServer debuger mode).
When I type "stack" in the debugger prompt, I see that the panic is being caused by the usb_ehci driver.
How can I by-pass this panic problem using the old OSR507 install media?
HARDWARE: Fujitsu Siemens PRIMERGY TX150-S5
Fujitsu Siemens PRIMERGY TX200-S3
Fujitsu Siemens PRIMERGY TX300-S3 Solution
If you are using the old SCO OpenServer 5.0.7 installation media from 2003, then follow TA126653 but use this boot string:
Boot
:defbootstr disable=usb_ehci Sflp=usb_msto(0,0,0) link="lsil""disable=usb_ehci" will disable the load of the usb_ehci during the load of the OpenServer 5.0.7 install kernel, thus preventing the ISL to panic at usb_ehci.
You then will be able to continue with the installation.
The "disable=usb_ehci" needs to be made permanent after the installation of SCO OSR507, because the server will panic every time you boot it.
Once the installation of OSr507 has finished, reboot the server and at the Boot Prompt, type:
Boot
: defbootstr disable=usb_ehciThe reboot will continue. Login as root and edit the /etc/default/boot and add at the end of the DEFBOOTSTR line the "disable=usb_ehci", so it looks like this:
DEFBOOTSTR=hd(40)unix swap=hd(41) dump=hd(41) root=hd(42)
disable=usb_ehciNOTES: It is highly recommend to use the July 2005 cut of OSR507
CD Media which has the appropriate USB additions and better USB
driver handling.