Technical article 127585

My upgraded Virtual Machine hangs at Power On when using the VMware Infrastructure Client

OpenServer 5.0.7

Written · Last revised

Problem

I have upgrade my SCO OpenServer 5.0.7 Virtual Machine to SCO OpenServer 5.0.7V Version 2.0.0 and have changed the SCSI Controller Type from BusLogic to LSI Logic as directed in the SCO OpenServer 5.0.7V Upgrade Supplement Getting Started Guide.

But when I go to power on the Virtual Machine the machine hangs before it even gets to start the VMware Virtual Machine BIOS.

Solution

This problem has been seen on some older versions of VMware ESX 3.5 with the VMware Infrastructure Client.

The client should pop up a window displaying a message similar to:

[msg.disk.adapterMismatch] The disk connected to the scsi0:0 node has been created for a BusLogic SCSI adapter, but the virtual machine's scsi0 device is a LSI Logic SCSI adapter. VMware ESX Server can change the disk's adapter type to LSI Logic. Use caution; if a guest operating system is installed on this disk, it may not be able to boot.

Do you want VMware ESX Server to change the adapter type for scsi0:0 disk?

but the message never gets displayed and the the Virtual Machine never boots.

SCO recommend that you apply the latest Update to your VMware ESX server and download and install the latest VMware Infrastructure Client to resolve this problem.

From the Xinuos technical article database, record 127585. Reproduced with permission. The original is at www.sco.com/ta/127585, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.