Technical article 125429

Open Server 5.0.7 PPP connection Wizard Failure

OpenServer 5.0.7

Written · Last revised

Problem

I log into OpenServer 5.0.7 (with maintenance pack 1) on some systems via a text only console. Try to run the 'PPP Configuration Wizard' from within SCOAdmin. 'scoadmin->Networks->PPP Connection Wizard', the screen just flickers and I'm brought back to the 'SCOAdmin->Networks' menu.

Then log in through the GUI, and attempt the same. Start a console and run 'scoadmin->Networks->PPP Connection Wizard'. This also fail's, with the following error to the console.

Fatal error: list element in quotes followed by "." instead of space

This also generated a tclerror file.

I have also seen this on 5.0.7 systems with Maintenance Pack 1 installed.

What is wrong?

An example of a tcl error file generated is :

==========================================================
Uncaught error in Tcl program: SaWZ:Main:
list element in quotes followed by "." instead of space
----------------------------------------------------------
Error code = NONE
----------------------------------------------------------
list element in quotes followed by "." instead of space
    while executing
"foreach word $line {
			if {($length + [string length $word]) > $max} {
				append newline "\n$word "
				set length [string length $word]
				incr le ..."
    ("foreach" body line 4)
    invoked from within
"foreach line $lines {
		set newline ""
		set length 0
		foreach word $line {
			if {($length + [string length $word]) > $max} {
				append newline "\n ..."
    (procedure "WordBreak" line 9)
    invoked from within
"WordBreak [IntlLocalizeMsg SCO_PPP_WZD_MSG_FINISHED2
"<name>"] 70"
    invoked from within
"VtLabel
.wizardFW.outer_SaWZ:Main_popup.outer_SaWZ:Main.SaWZ:Main.
bodyformfini
sh.rightform.vt_frameForm.saWZ_Dummy_name_9.finishedL
-labelLeft  -lef
..."
    ("eval" body line 1)
    invoked from within
"eval $cmd"
    invoked from within
"set widget [eval $cmd]..."
    ("while" body line 32)
    invoked from within
"while {![lempty $object]} {
	    set item [lvarpop object 0]
	    set retval [keylget item ObjectType type]
	    if {$retval == 0} {
		echo [IntlLocal ..."
    ("while" body line 4)
    invoked from within
"while {![lempty $objects]} {
	set object [lvarpop objects 0]
	lvarpop object 0
    	while {![lempty $object]} {
	    set item [lvarpop object 0]
	     ..."
    (procedure "SaWZ:CreateObjects" line 7)
    invoked from within
"SaWZ:CreateObjects $widget $nextobject $pgn"
    ("while" body line 3)
    invoked from within
"while {$retval == 1} {
		keylset nextobject Object $newobject
		SaWZ:CreateObjects $widget $nextobject $pgn
		keyldel item Object
	        set retval  ..."
    ("while" body line 48)
    invoked from within
"while {![lempty $object]} {
	    set item [lvarpop object 0]
	    set retval [keylget item ObjectType type]
	    if {$retval == 0} {
		echo [IntlLocal ..."
    ("while" body line 4)
    invoked from within
"while {![lempty $objects]} {
	set object [lvarpop objects 0]
	lvarpop object 0
    	while {![lempty $object]} {
	    set item [lvarpop object 0]
	     ..."
    (procedure "SaWZ:CreateObjects" line 7)
    invoked from within
"SaWZ:CreateObjects $rightform $object $pgn"
    ("while" body line 30)
    invoked from within
"while {[info exists pagenames($n)]} {
	set pgn $pagenames($n)
	set bodyform [VtForm  $SaWZ_MainForm.bodyform$pgn
-leftSide FORM -
topSide FORM -rightS ..."
    (procedure "SaWZ:CreatePages" line 16)
    invoked from within
"SaWZ:CreatePages"
    (procedure "SaWZ:Main" line 21)
    invoked from within
"SaWZ:Main .wizardFW"
    ("uplevel" body line 1)
    invoked from within
"uplevel $command"
==========================================================

Solution

This issue has been reported to SCO Engineering, and may be addressed in a future release.

Workaround : You can still set up PPP with : 'SCOAdmin->Networks->Network Configuration Manager->Hardware->Add WAN Connection->PPP'. During which you will given the option of running the PPP Manager, or you can run it later 'scoadmin->Networks->PPP Manager->PPP'

At that point you can launch the PPP manager or if you come back later, highligh the TCP/IP under PPP and choose Protocol->Modify Protocol->Launch PPP Manager

From the Xinuos technical article database, record 125429. Reproduced with permission. The original is at www.sco.com/ta/125429, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.