Problem
Installing on a Adaptec 7899 Dual Channel Controller with BIOS v3.10, after trying to load 5% of the operating system, the server panics with:
Double Fault in system mode:
cr0 0x8001001B cr2 0xDFFFEFFC cr3 0x00002000 tlp 0x00000000
ss 0x00000000 uesp 0x00000000 efl 0x00000000 ipl 0x00000007
cs 0x00000000 eip 0x000000000 err 0x00000000 trap 0x00000008
esp 0xF0000FE0 ebp 0x00000000 esi 0x00000000 edi 0x00000000
ds 0x00000160 es 0x00000160 fs 0x00000160 gs 0x00000160
CPU 0x00000001
current TSS
link 0x00000000 esp0 0xE0000E68 ss0 0x00000160 esp1 0xF0000FFC ss1
0x00000160 esp2 0xF0000FFC ss2 0x00000160 cr3 0x00002000
eip 0xF0191105 esl 0x00010006 eax 0x00000000 ecx 0x00000000edx 0x00000045 ebx 0xF0810980
PANIC: k_trap - Double fault trap type 0x00000008 Solution
Take the following steps:1. Obtain the latest "ad160" boot time loadable driver (BTLD) from SCO's FTP site at:
https://ftp.scoexpert.com/openserver5/drivers/OSR505/btld/2. Install with the following boot string:
defbootstr link=ad160 btld=fd(65) scsi.noscan pci.noscanThis problem has been reported to SCO Engineering.
NOTE: Installing on the same hardware to a IDE disk works fine.OpenServer 5.0.6 works fine with no bootstring.
See also
ta111523, "A fresh install of OpenServer 5.0.5 or 5.0.6 on top of a 5.0.5 or 5.0.6 system hangs."
ta111802,"What driver do I use for my Adaptec Ultra160 (7892 or 7899 chipset) Host Adapters?"
ta113402, "I am receiving panics with "PANIC: k_trap kernel mode trap type 0x0000000F" at random intervals during installation."
bootstring(HW)