Technical article 126019

Openserver 5.0.7 installation fails with "no root disk controller found" on systems where the root hard drive is on a SATA controller.

OpenServer 5.0.7

Written · Last revised

Problem

I have a system where the root hard drive is located on a SATA controller. The following message is displayed during the hardware initialization screen

No root disk controller found
and the installation cannot proceed.

Solution

The following wd driver now supports SATA controllers that operate only in Legacy Mode or that can enable Legacy Mode in the BIOS:

          https://ftp.scoexpert.com/openserver5/507/drivers/wd.suppcd3/wd_readme.txt
https://ftp.scoexpert.com/openserver5/507/drivers/wd.suppcd3/wd_btld.img

The above wd_readme.txt file contains installation instructions for this driver.

See also

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01510421

From the Xinuos technical article database, record 126019. Reproduced with permission. The original is at www.sco.com/ta/126019, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.