Technical article 120624

OpenServer 5.0.7: Using ksl.disable in the default boot string causes sco_pmd to not start during boot.

OpenServer 5.0.7

Written · Last revised

Problem

If you use ksl.disable in either /etc/default/boot or by issuing it at the boot prompt sco_pmd will not start, and you will get errors on the console about you having to reboot the machine.

Cause

The new sco_pmd binary needs UNIX domain sockets to start properly. By issuing ksl.disable you have disabled sockets, therefore sco_pmd can not start.

Solution

This is being addressed by engineering at this time. This should be resolved in Maintenance Pack I for OpenServer 5.0.7

From the Xinuos technical article database, record 120624. Reproduced with permission. The original is at www.sco.com/ta/120624, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.