Technical article 125498

OpenServer 5.0.7 with the ksl.disabled parameter issued and MP1 installed causes NFS not to start and RPC errors.

OpenServer 5.0.7

Written · Last revised

Problem

MP1 fixes the issue where if you use ksl.disable at either the bootprompt or in /etc/default/boot the system will hang during boot while the license subsystem tries to initialize.

However now we are seeing that machines booted with ksl.disable and MP1 installed will not start NFS due to the way the startup scripts are ordered in /etc/rc2.d.

Cause

The problem is caused because the RPC subsystem is initialized before the TCP stack is built. During a normal non ksl.disable boot this is not a problem. But when running ksl.disable the stack is initialized in S85tcp and the RPC subsystem is started in S84rpcinit.

Solution

The solution to this problem is to move the startup scripts in /etc/rc2.d. You will want to move the following scripts so they start after the TCP stack is initialized:

#mv /etc/rc2.d/S84rpcinit /etc/rc2.d/S86rpcinit
#mv /etc/rc2.d/S85nis /etc/rc2.d/S87nis

Once you've done this either reboot your server or start the portmapper by hand:

#/etc/portmap
and then start NFS:
#nfs start

and then if you are using NIS:

#nis start

From the Xinuos technical article database, record 125498. Reproduced with permission. The original is at www.sco.com/ta/125498, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.