Technical article 126723

OSR507:Installation of some HP servers with USB floppy fails

OpenServer 5.0.7

Written · Last revised

Problem

I want to install a HP server (for example DL380G5) using a USB floppy. During initialization I get an error similar to this one:

usb_msto: Inquiry Read failed, Unbinding! usb_msto: Please disconnect and re-attach the device to try again. T.7455-usb_msto0 0300 3.2 <Drvr16>: Initialization failure. Please re-attach the device to retry.

Solution

Different USB floppy models may work in different ways.

The TEAC FD 05-PUW is known to work.

Further make sure that the USB floppy is connected when you power on your system.

To load the BTLD driver from the USB floppy use the following bootstring, for example:

defbootstr link=hpsas hd=Sdsk Sdsk=hpsas(0,0,0,0)

You may be asked after creation of the filesystem which floppy you are using (floppy0 or floppy1). Choose floppy1.

From the Xinuos technical article database, record 126723. Reproduced with permission. The original is at www.sco.com/ta/126723, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.