Technical article 127403

OSR507V: How do I get started with OpenServer 5.0.7V?

OpenServer 5.0.7

Written · Last revised

Problem

How do I get started with OpenServer 5.0.7V?

Solution

For Getting Started with 507V please see:

http://www.sco.com/products/unix/virtualization/
http://www.sco.com/products/unix/virtualization/faq.html#_Toc225310984

For getting started with the product, download the Getting Started Guide and product from:

http://www.sco.com/support/downloads.html

Select OSR507V then either VMware or Hyper-V and you will see a full Getting Started Guide there.

See also: http://www.sco.com/support/docs/openserver/

A number of useful videos detailing instructions on the use of OSR507V can be found at:

http://sco.com/products/unix/virtualization/videos.html
and for further assistance please visit:
http://www.sco.com/ta and search for OSR507V

Information on Migration, to move your users, printers, application and data onto your new virtual platform can be found at:

TA 111764

Information on how to backup your OSR507V can be found at:

TA 127437
and for VMware:
TA 127410
Troubleshooting:
---------------
Visit http://www.sco.com/support/download.html to check the latest
product version.

To check what version you are on, run:

# customquery listcomponents SCO:osr5vconf
NOTE:     Addressing the Clock:
          --------------------
          Once installed, it is recommended to ensure the clock on the osr507v
          virtual machine is kept up-to-date.
For VMware, it is recommmended to configure the Host's NTP Time
Configuration by going to Configuration -> Software -> Time
Configuration and setting up NTP there.  By default, vmtools is set
to sync your osr507v clock with the VMware host.

Should your clock have difficulty in keeping time, which can be seen by having a large offset when running "ntpdate -q <time server> when third party drivers and SMP is installed then:

We were able to correct it by setting the tunable parameter:

disable_short_timers to 1

There are two ways to do that:

1.  Use a boot time parameter:

* Add "clock.disable_short_timers=1" to the defbootstr line in /etc/default/boot.

* then reboot.
2. Alternatively, change a kernel tunable:

* Change the value of "disable_short_timers" to 1 in /etc/conf/pack.d/clock/space.c

* Rebuild the kernel, ie. cd /etc/conf/cf.d ; ./link_unix -y

* then reboot.

It is recommended to activate this option if SMP has been enabled and a third-party driver is in use.

For Hyper-V, please see:

"How can I maintain accurate system time on SCO OpenServer 5.0.7V for Hyper-V." at TA 127547

From the Xinuos technical article database, record 127403. Reproduced with permission. The original is at www.sco.com/ta/127403, which is reachable but blocked from search engines.

Next step

Need this fixed rather than explained?

Tell us the release, what the system runs and what it is doing. We will reply by email with what we would do next.

  • You deal with the people who do the work
  • No obligation, and no upgrade required before we will help
  • We tell you plainly if something is not worth doing

Send an enquiry

We reply by email. If a server is down, say so in the first line. You can also write to help@scoexpert.com.